• Locked Locked
  • Replies 11 replies
  • Subscribers 119 subscribers
  • Views 6569 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DS-5 Android - Problem debugging on a device

iosif hamlatzis
Note: This was originally posted on 19th April 2012 at http://forums.arm.com

I've finally managed to make the emulator work and now can debug my game on it. Thank you.

As I don't have an actual android device, I've installed an experimental version of ICS on my HP TouchPad. It seams everything works all right. I can use the adb utility provided with the SDK to connect to the device with no problem. But I cannot debug from inside eclipse under windows on the actual device.

I created a second debug configuration for the device and selected my device in the Connection tab at the combo-box, but after a while I receive a message that eclipse cannot connect to the device. This is strange as I have no problem with the connection. Under a dos window using the adb command I can see I can connect, I even can shell into the device.
Parents
  • Arm Employee Badge
    Note: This was originally posted on 27th April 2012 at http://forums.arm.com


    Just changing the two scripts (run.py and setup.py) didn't do the job so I've searched all .py files and modified in similar way all occurrences  of device to be empty. Again I think it partial worked.




    Looks like you are getting close. Have you enabled USB debugging on the device by going into the settings? This link explains how to do it ( http://maketecheasie...vice/2011/04/06 ) but be aware that different devices have different screens to configure this option.That is something you could try. Let me know how it goes!

    Vinod
Reply
  • Arm Employee Badge
    Note: This was originally posted on 27th April 2012 at http://forums.arm.com


    Just changing the two scripts (run.py and setup.py) didn't do the job so I've searched all .py files and modified in similar way all occurrences  of device to be empty. Again I think it partial worked.




    Looks like you are getting close. Have you enabled USB debugging on the device by going into the settings? This link explains how to do it ( http://maketecheasie...vice/2011/04/06 ) but be aware that different devices have different screens to configure this option.That is something you could try. Let me know how it goes!

    Vinod
Children
No data