Can't compile my code with arm-none-eabi-gcc to work, Beginner

I've only used AVR and Arduino before which really don't count as embed! so I have a little trouble compiling my blinky.

I'm mainly a PC programmer. I have an LPC1768 dev board!

Here's what I did:

I first installed arm-none-eabi-gcc on my Ubuntu virtual machine (I have a ubuntu dual boot but I wanted to try it here first to learn)

Secondly I wrote a small code which uses the lpc17xx.h header and does nothing but turn a GPIO on and high, I then compiled it with

arm-none-eabi-gcc -Wall -mcpu=cortex-m3 -mlittle-endian -mthumb  -DLPX17xx -Os -c main.c -o main.o

It worked! I repeated this for all of the files("core_cm3.h", "LPC17xx.h", "system_LPC17xx.c") and it worked too, but when I tried to compile "startup_lpc17xx.s" it gave me a bunch of errors saying "startup_LPC17xx.s:272: Error: bad instruction".

So I found an already compiled .o version of this file in keil folders and used it instead.

I googled and found an lpc1768 linker script and ran this:

arm-none-eabi-gcc -mcpu=cortex-m3 -mlittle-endian -mthumb -DLPC17xx -TLPC17xx.ld -Wl,--gc-sections system_LPC17xx.o main.o startup_LPC17xx.o -o main.elf

and I get this error: "startup_LPC17xx.o: file not recognized: File format not recognized

collect2: error: ld returned 1 exit status"

Can anyone help me I also edited the linker script, I changed "FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K" to "FLASH (rx) : ORIGIN = 0x2000 , LENGTH = 512K" because the board says the code should start from here as it has a bootloader and my pc recogonizes it as a USB storage

also the board manual says I should add "NO_CRP" to asm tab of keil project options. I don't know what this is so I've no idea what to do.

I did manage to create a file in windows with CrossStudios but my board didn't blink the leds the same code worked in keil but I rather fix my GCC toolchain

I'm a begginer and I don't know how to use makefile or write a linker script or a startup code! I don't know much on how the code runs either

Parents Reply Children
No data
More questions in this forum
There are no posts to show. This could be because there are no posts in this forum or due to a filter.