• State Accepted Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 135 subscribers
  • Views 26912 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Trouble profiling with streamline

Raluca

I'm trying to go through the steps of getting started with Streamline but I got stuck on the gatorme command : instruction says "On the host, run the gatorme script to set up the target device so that Streamline can connect to it. Use the following command-line arguments:.."

Following that I am passing the following command: gatorme com.arm.malideveloper.openglessdk.texturecube G72 gatord and I get the following issue:

gatord: 1 file pushed. 11.5 MB/s (2490344 bytes in 0.207s)
Streamline gatord version 700 (Streamline v7.0)
Using unix domain socket instead of TCP connection
Manual step: Capture in Streamline, and then press any key.
Press any key to continue . . . Ignoring user provided Mali device type

pkill: TERM->8356: Operation not permitted

I'm not really sure where it comes from. The target device is a samsung s9 with a mali-G72 gpu and usb debugging is enabled and the adb sees the device.