• State Accepted Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 350 subscribers
  • Views 5267 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zeroise complete L1 and L2 caches in ARM v8?

Thole

Hi All,

my situation is, I have to zeroize complete caches in ARM-v8 (Xilinx Ultrascale+ Device). Zeroise or set every line to constant values.

Does anybody know how can I solve this?

Thanks in advance.

Parents
  • 0
    A incomplete solution would be to repeatedly reading a block of 0xffs from RAM, thus causing the cache to fill with 0xffs.
    Invalidation and flushing will not help in this case as that does not empty the data from the cache.
    The difficulty is in ensuring that the cache is completely cleared, you would have to work out the access pattern needed to cause a complete clear based on the characteristics of the cache in question.
Reply
  • 0
    A incomplete solution would be to repeatedly reading a block of 0xffs from RAM, thus causing the cache to fill with 0xffs.
    Invalidation and flushing will not help in this case as that does not empty the data from the cache.
    The difficulty is in ensuring that the cache is completely cleared, you would have to work out the access pattern needed to cause a complete clear based on the characteristics of the cache in question.
Children
No data