Hello,
I'm kangho Lee managing IP-XACT bus definiton in my company.
I can't create issue to Contact Support (arm.com) with unknown error. so I borrow this page.
I have a question regarding IP-XACT Bus Definition of AMBA5 AHB5Initiator.
My company's engineer is provided IP and bus definition [amba.com AHB5 Initiator r0p0_0] from ARM. An AHB5Initiatior is used in that IP.
But I found that revision of bus definition is defferent with my managed one and port list and port element value are different also.
I write related information of bus definition and abstraction definition of AHB5 Initiator below.
The revision 0 and revision 2 don't have compatibility. so I think revision 0 and revision 2 are different abstraction definition but they have same VLNV [amba.com AMBA5 AHB5Initiator r0p0_0]
It's unable to change abstraction definition from revision 0 to revision 2 because Many IP are already designed IP with revision 0.
Can you confirm this?
regards,
kangho Lee.
Hi kangho Lee
This forum is for questions about using the community. Please take a look at https://community.arm.com/support-forums/ and let me know which forum I can move this post to. This will help the right people see your question.
Thanks
Oli
Arm Community team
Hi, Oli
Thank you for reply.
I also create support ticket at Contact Support (arm.com), being discuss with related team.
so this post can be deleted. Please delete it.
thank you for your support.
thanks,
kangho lee.
Thank you, I have locked the thread, but will keep it in case anyone else has the same issue and can see the solution.