• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 10 replies
  • Subscribers 351 subscribers
  • Views 13308 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cortex A9 (IMX6) : Enabling branch prediction aborts

Gopu

Hello,

I am using imx6 (cortex- A9) board, and my mmu environment is as follows
            mmu   - enabled
            L1 data cache - enabled
            L1 instruction cache - enabled
            D-side prefetch - enabled
            L2 cache - disabled
            Branch prediction - disabled

With this environment, my code runs for a longer time (more than 12 hours) with out any issues.
But, if I enable branch prediction, the code aborts in few seconds, at random addresses.
I am not able to understand what goes wrong.
Are there any special option which I have to consider while building my code.
I am using GCC as the compiler.


Note : In my code, I am using a static library, which was given by our vendor.

Any help would be great.

Thanks,

Gopu

 

Parents
  • +1 in reply to Gopu
    imx6 seems sensitive to your software. Did you report this issue to the SoC vendor? Why other imx6 did not see the same issue that you saw? Is there any sequence software special? That can trigger this issue. Could you share your interrupt context switch code in github? Who make your board? If board does not provide clean reference clock to imx6, this could be a board design issue too. Still, it is hard to make a conclusion without the source code, the board schematic, and consulting with SoC vendor and board designer.
Reply
  • +1 in reply to Gopu
    imx6 seems sensitive to your software. Did you report this issue to the SoC vendor? Why other imx6 did not see the same issue that you saw? Is there any sequence software special? That can trigger this issue. Could you share your interrupt context switch code in github? Who make your board? If board does not provide clean reference clock to imx6, this could be a board design issue too. Still, it is hard to make a conclusion without the source code, the board schematic, and consulting with SoC vendor and board designer.
Children
No data