• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 6 replies
  • Subscribers 351 subscribers
  • Views 26396 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

EDSCR err bit set after a write to EDITR

kka

Hi,

I have a very similar question to the resolved entry "reason for ARMv8 EDSCR err bit set".

So I try to follow that to give the state information.

Cortex-57

JTAG TCK = 3,788MHz.

ARM_STATE_AARCH64 is set

Before Halt state:

EDPRSR = 0x1

EDSCR = 0x03007C02

After Halt state:

EDPRSR = 0x1

EDSCR = 0x03006113

After Write to EDITR with opcode 0xd503201f for a NOP instruction:

EDPRSR = 0x11

EDSCR = 0x03006153

EDSCR differs from the resolved entry in bits HDE=1, RW=0100, EL=1

And Aarch64 has no thumb mode instruction, this does not solve my problem.

Any help is appreciated.

0