• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 90 subscribers
  • Views 6124 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AXI

Muthuvenkatesh

Why burst must not cross 4kb  in AXI ?

Parents
  • 0
    Hi Venketesh,

    Below factors controls the burst:
    Burst_length: AxLEN[7:0]
    Burst_size : AxSIZE[3:0]
    Burst_type : AxBURST[1:0]

    While length can be 1 to 256 for an INCR, size could be 1 to 16, the max burst can be 256*16 giving a size of 4KB.
    I hope this helps.

    Regards,
    Nishant
Reply
  • 0
    Hi Venketesh,

    Below factors controls the burst:
    Burst_length: AxLEN[7:0]
    Burst_size : AxSIZE[3:0]
    Burst_type : AxBURST[1:0]

    While length can be 1 to 256 for an INCR, size could be 1 to 16, the max burst can be 256*16 giving a size of 4KB.
    I hope this helps.

    Regards,
    Nishant
Children