• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 92 subscribers
  • Views 10826 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AHB Multilayer

Jesuraj vinoth Joseph
Note: This was originally posted on 30th April 2008 at http://forums.arm.com

In the multilayer environment,  i found a interconnect matrix with interface signals on the Master side having a hsel signal. Can anyone specify the significance of it. A basic doubt is that apart from the interconnect matrix do we hav any slave mux and decoder.
Parents
  • 0
    Note: This was originally posted on 30th May 2008 at http://forums.arm.com

    Hi,

    In regard to the multilayer environment why does ARM not give a specific interface list of the interconnect matrix as it did for AHB 2.0 Master and Slave. Can anyone give any links for the above.
    Further more is there any difference in connecting Lite and Non-lite Master and Slaves to the Multilayer.
    Should it support both lite and non-lite Master/Slaves.

    regards
    ark
Reply
  • 0
    Note: This was originally posted on 30th May 2008 at http://forums.arm.com

    Hi,

    In regard to the multilayer environment why does ARM not give a specific interface list of the interconnect matrix as it did for AHB 2.0 Master and Slave. Can anyone give any links for the above.
    Further more is there any difference in connecting Lite and Non-lite Master and Slaves to the Multilayer.
    Should it support both lite and non-lite Master/Slaves.

    regards
    ark
Children
No data