• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 1 reply
  • Subscribers 91 subscribers
  • Views 13432 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What is expected from response if in WRAP txn in AHB is un-aligned.

Spadhy

Hi,

In spec it's mentioned that in WRAP transaction the un-aligned address will be made aligned but only when it's crossing the boundary.

Wanted to know what's expected when the WRAP txn is started with a un-aligned address.

Case1: Starting ADDR= 0x35 with address boundary of 0x20.

Case2: Starting ADDR=0x35 with boundary of 0x40.

Parents
  • +1

    In AHB all transfer HADDR values MUST be aligned to the HSIZE transfer width, so can you clarify what HSIZE is in each of your examples ?

    Could you also give me a reference to where in the spec you have seen the mention of "un-aligned address" so that I can better understand what is confusing you ?

Reply
  • +1

    In AHB all transfer HADDR values MUST be aligned to the HSIZE transfer width, so can you clarify what HSIZE is in each of your examples ?

    Could you also give me a reference to where in the spec you have seen the mention of "un-aligned address" so that I can better understand what is confusing you ?

Children
No data