• State Accepted Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 23 subscribers
  • Views 1659 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with EventRecorder Integration "STM32L476RCT6TR",ST_link Debugger.

marwen mechri

I am attempting to implement event recording on an STM32L476RCT6TR microcontroller using the ARM Compiler version 5.

I followed the steps in this Arm documentation: https://learn.arm.com/learning-paths/embedded-and-microcontrollers/uv_debug/3_event_recorder/.

After including #include "EventRecorder.h" in main.c, I received this error:

C:\Users\xxxx\Application\Middlewares\EventRecorder\Source\EventRecorder.c(32): error: #5: cannot open source input file "stdatomic.h": No such file or directory

My Runtime Environment configuration is shown below:

I searched for the stdatomic.h header file and found it in these locations:

  • C:\Users\xxxxx\AppData\Local\Keil_v5\ARM\ARMCLANG\include\libcxx\
  • C:\Users\xxxxx\AppData\Local\Keil_v5\ARM\ARMCLANG\include
  • C:\Users\xxxxx\AppData\Local\Keil_v5\ARM\ARMCLANG\lib\clang\19\include

However, adding these paths to my project's include directories resulted in numerous compilation errors. I suspect these are not the correct header files for my project.

I also observed that the Event Recorder package is located at:

C:\Users\xxxxx\AppData\Local\Arm\Packs\ARM\CMSIS-View\1.2.0\

and stdatomic.h is not present within that directory."

For more details, here are all the files I found on my system:

Note: I intend to perform event recording using the ST-Link debugger.

Could you please assist me in resolving this issue? I suspect a configuration error in my environment. Could you tell me where stdatomic.h is expected to be located?

Parents
  • 0 in reply to Ronan Synnott

    Hello Ronan,

    thanks for your response.

    You are right, after I changed the compiler version to 6, the event record works fine.

    I want to know if I can run the event record over CMSIS v5?

     However, based on the following information, it seems I need to perform the migration from CMSIS 5 to CMSIS 6.

    I want to prevent the migration if possible; the project is complicated, and I want to prevent regression.

    Therefore, based on the following note, 'CMSIS-VIEW replaces and extends functionality provided as a part of the keil::arm_compiler pack,'

    is there any further information about the functionality of the event record in the arm_compiler pack?

     

    Note: The source of the note is here: CMSIS-View: Overview

Reply
  • 0 in reply to Ronan Synnott

    Hello Ronan,

    thanks for your response.

    You are right, after I changed the compiler version to 6, the event record works fine.

    I want to know if I can run the event record over CMSIS v5?

     However, based on the following information, it seems I need to perform the migration from CMSIS 5 to CMSIS 6.

    I want to prevent the migration if possible; the project is complicated, and I want to prevent regression.

    Therefore, based on the following note, 'CMSIS-VIEW replaces and extends functionality provided as a part of the keil::arm_compiler pack,'

    is there any further information about the functionality of the event record in the arm_compiler pack?

     

    Note: The source of the note is here: CMSIS-View: Overview

Children