We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello All, I have uVision 4 and a FRDM-KL05Z evaluation board. At the moment I am programming the flash by copying and pasting the .S19 file to the FRDM-KL05Z Drive.
When I try to use the Download button in the IDE I get the following message:
Error: Flash Download failed - Target DLL has been cancelled.
The only way I have of connecting the board is via USB cable. The board has Open SDA and device manager shows a Com port when the board is plugged in.
Does anyone know what settings I need to make to get dowload and debugging to work?
Thanks in advance Dan
Does Keil support OpenSDA in it's debugging options?
If not, perhaps segger.com/opensda.html
Or ask Freescale
Thanks for the tip. I went to Segger and downloaded and installed their J-Link OpenSDA. Followed instructions and downloaded and installed new firmware. Cycled power. New device detected. Searched for and found drivers.
After a few false starts and more errors, I changed the right setting and it works!
Thank You!