We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
How to configurate the HyperTerminal to get response from my Oem Board(LPC1788) via RS232 port (I'm running the s_ob_uart_rs232 sample)? Help please.
If you already have the same settings in HyperTerminal as the example uses, then I can't see why you ask for help how to configure HyperTerminal.
It sounds more like you need to check the cable, and if all straps etc are correctly mounted. Does the software print something when booting? Have you verified if something happens on the serial connector? Does it look like it should?
I asked because i didn't know where the error come from. The cable works fine. what do you mean by "Does the software print something when booting" and "Have you verified if something happens on the serial connector"? how can i verify that?
How do you know that?
It's new. I don't know how to test it.
So the cable is new. You don't know how to test it. But you make the statement that "the cable works fine". Color me confused, but I really can't understand how you can know something you don't know how to test works fine - especially since you created this thread just because your serial communication did _not_ work fine...
straight and crossed. Are you sure you have the right kind
And the rest!!
You didn't mention your Flow Control setting in hyperterminal...