• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 22 subscribers
  • Views 1463 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RS232

Didi R

How to configurate the HyperTerminal to get response from my Oem Board(LPC1788) via RS232 port (I'm running the s_ob_uart_rs232 sample)? Help please.

Parents
  • 0 in reply to Didi R

    So the cable is new. You don't know how to test it. But you make the statement that "the cable works fine". Color me confused, but I really can't understand how you can know something you don't know how to test works fine - especially since you created this thread just because your serial communication did _not_ work fine...

Reply
  • 0 in reply to Didi R

    So the cable is new. You don't know how to test it. But you make the statement that "the cable works fine". Color me confused, but I really can't understand how you can know something you don't know how to test works fine - especially since you created this thread just because your serial communication did _not_ work fine...

Children