Keil forum RS232

State Not Answered
Locked Locked
Replies 12 replies
Subscribers 22 subscribers
Views 1456 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RS232

Didi R over 13 years ago

How to configurate the HyperTerminal to get response from my Oem Board(LPC1788) via RS232 port (I'm running the s_ob_uart_rs232 sample)? Help please.

Parents

0 Didi R over 13 years ago in reply to Andy Neil

It's new. I don't know how to test it.
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Didi R over 13 years ago in reply to Andy Neil

It's new. I don't know how to test it.
Cancel
Vote up 0 Vote down

Cancel

Children

0 ImPer Westermark over 13 years ago in reply to Didi R

So the cable is new. You don't know how to test it. But you make the statement that "the cable works fine". Color me confused, but I really can't understand how you can know something you don't know how to test works fine - especially since you created this thread just because your serial communication did _not_ work fine...
Cancel
Vote up 0 Vote down

Cancel
0 ²erik malund over 13 years ago in reply to ImPer Westermark

straight and crossed. Are you sure you have the right kind
Cancel
Vote up 0 Vote down

Cancel
0 Andy Neil over 13 years ago in reply to ²erik malund

And the rest!!

You didn't mention your Flow Control setting in hyperterminal...
Cancel
Vote up 0 Vote down

Cancel