hi, my cortexa9 target used to boot up to the cmd> prompt after simply turning ON the power. For some unknown reasons, it's now displaying the message 'Insert MicroSD Card and restart.' when I turn the power ON. From there, I have to push the reset button (black) to get to the cmd> prompt. Any ideas how to resolve this and get the original behavior back ?
Regards,
You obviously need to contact the board supplier and/or manufacturer to get this essential information!
Without this information, the board is worthless - so, if you really can't get it, you'll need to get another board that is properly documented & supported.
None of this has anything to do with Keil.
well since it says http://www.keil.com everywhere on the board package and 'quick start guide' I figured I would ask http://www.keil.com directly. If you don't have a clue, that's okay. I'll give arm.com a try. All in all, this sounds like a simple configuration thing that anyone with a little board experience might have come across already.
Note that this is an end-user forum. So to ask Keil directly, you shouldn't post on this forum, but instead contact Keil support.
OK, fair enough.
But remember that you're the only one that can see the board and its packaging - all we can see is what you put in your posts!
If it's a Keil product, you should be able to find the details here: http://www.keil.com/product/
It might be that it's an ARM product (or even someone else's product), and they're just recommending (or used) Keil tools.
Anyhow, see the links at the foot of the page for Keil contact details...