can anybody help???
i want to record the signal on analog input 1
one of the specifications is to record(to see if is low and high) the signal at the maximum speed(6000/min) of motor at both sensor chanel and to see time diferents
Your second attempt at specifications: "OK I write here all I have and what I want
I use mc Infineon SAB 80C535 eprom is 27SF512 ic2bus is PCF8574 ADC max1168
and i must record on 2 inputs teh signal from 2 hall sensor (0 volt 12 V) and the motor are 6000 rotation/minute..."
I can't see anything that claims that you need to "record(to see if is low and high) the signal at the maximum speed(6000/min) of motor at both sensor chanel and to see time diferents".
Why are you constantly posting subsets of the specification that does not cover the parts that you request help with?
what do you think? is posibile to make that with my mc board?
It is possible to do it with your board but you will have to write some code before it will work the way you want it to.
but you must read the datasheets first.
is better method to try to work with impuls (low, high) onn digital inputs??