• State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 22 subscribers
  • Views 3551 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

signal record on the analog inputs

rotar tutzu

can anybody help???

i want to record the signal on analog input 1

Parents
  • 0 in reply to rotar tutzu

    Your second attempt at specifications:
    "OK
    I write here all I have and what I want

    I use mc Infineon SAB 80C535
    eprom is 27SF512
    ic2bus is PCF8574
    ADC max1168

    and i must record on 2 inputs teh signal from 2 hall sensor (0 volt 12 V) and the motor are 6000 rotation/minute..."

    I can't see anything that claims that you need to "record(to see if is low and high) the signal at the maximum speed(6000/min) of motor at both sensor chanel and to see time diferents".

    Why are you constantly posting subsets of the specification that does not cover the parts that you request help with?

Reply
  • 0 in reply to rotar tutzu

    Your second attempt at specifications:
    "OK
    I write here all I have and what I want

    I use mc Infineon SAB 80C535
    eprom is 27SF512
    ic2bus is PCF8574
    ADC max1168

    and i must record on 2 inputs teh signal from 2 hall sensor (0 volt 12 V) and the motor are 6000 rotation/minute..."

    I can't see anything that claims that you need to "record(to see if is low and high) the signal at the maximum speed(6000/min) of motor at both sensor chanel and to see time diferents".

    Why are you constantly posting subsets of the specification that does not cover the parts that you request help with?

Children
No data