• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 24 subscribers
  • Views 25016 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't read project project file 'ProjectFileName'!

andor pastor

Hello I am using microVision2 V2.40. When I'm trying to open the project file I have a following get this message
Can't read project project file 'ProjectFileName'!.
Anyone had similar problems?

Parents
  • 0 in reply to rkopsch

    I made the changes you mention in uVision 5, Edit>Configuration>Editor>General Editor Setting>Enconding (I tested the two option Chinese) but no changes occur, the problem is not solved, I get the same problem. Also, comments with Chinese characters inside .C files do not display well.

Reply
  • 0 in reply to rkopsch

    I made the changes you mention in uVision 5, Edit>Configuration>Editor>General Editor Setting>Enconding (I tested the two option Chinese) but no changes occur, the problem is not solved, I get the same problem. Also, comments with Chinese characters inside .C files do not display well.

Children