• State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 21 subscribers
  • Views 1363 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Data from hyper terminal to S1IN

Xalph Sudonym

is there any way by which i can send the output of hyper terminal to S1IN(vtreg)?

Parents
  • 0

    You will either need a PC with two COM ports, or two PCs.

    Connect the COM port used by hypoterminal to the COM port used by the Simulator.

    You will need a crossover cable - check that it's working by using Hypoterminal on both COM ports

Reply
  • 0

    You will either need a PC with two COM ports, or two PCs.

    Connect the COM port used by hypoterminal to the COM port used by the Simulator.

    You will need a crossover cable - check that it's working by using Hypoterminal on both COM ports

Children
  • 0 in reply to Andy Neil

    i want to send data from hyperterminal to UVision2 program, so that it is taken into into S1IN. u r sayin that i use a crossover cable...but wat is the setting in UV2 tat i will hav to do so tat the data is taken into S1IN(after puttin the crosover cable in place)?

  • 0 in reply to Xalph Sudonym

    "u r sayin..."

    Unless you are actually writing this on a mobile phone keypad, or have some disability that impairs your use of the keyboard, you need to write your words in full.

    If it's really too much trouble for you to write "you are saying..." in full, then this is my final answer.

  • 0 in reply to Xalph Sudonym

    Mr.Yash Sing,
    y r u always wastin d 4m webspas by givin l'oborated txt? nsted of
    ...i want to send data from hyperterminal to UVision2 program, so that it is taken into into S1IN. u r sayin that i use a crossover cable...but wat is the setting in UV2 tat i will hav to do so tat the data is taken into S1IN(after puttin the crosover cable in place)?...

    u can write as
    ... i wan 2 sen data frm hy/termnal 2 UVson2 progrm, so tat its takn n2 S1IN.u r sayin tat i use a crosover cable... bt wats d z'tin n UV2 tat i'll hav 2 do so tat d data s takn n2 S1IN(aftr putin d crosover cabl n plas)? ...

    dis vil b ec 4 us 2 read.

  • 0 in reply to Xalph Sudonym

    Mr.Yash Sing,
    y r u always wastin d 4m webspas by givin l'oborated txt? nsted of
    ...i want to send data from hyperterminal to UVision2 program, so that it is taken into into S1IN. u r sayin that i use a crossover cable...but wat is the setting in UV2 tat i will hav to do so tat the data is taken into S1IN(after puttin the crosover cable in place)?...

    u can write as
    ... i wan 2 sen data frm hy/termnal 2 UVson2 progrm, so tat its takn n2 S1IN.u r sayin tat i use a crosover cable... bt wats d z'tin n UV2 tat i'll hav 2 do so tat d data s takn n2 S1IN(aftr putin d crosover cabl n plas)? ...

    dis vil b ec 4 us 2 read.

  • 0 in reply to neo neo

    u can write as

    ... i wan 2 sen data frm hy/termnal 2 UVson2 progrm, so tat its takn n2 S1IN.u r sayin tat i use a crosover cable... bt wats d z'tin n UV2 tat i'll hav 2 do so tat d data s takn n2 S1IN(aftr putin d crosover cabl n plas)? ...

    dis vil b ec 4 us 2 read.

    ezr:

    i wan 2 sen d8a frm hyptrm 2 uv2 so tat its takn n2 S1IN. u r sayin tat i use a xover cble... bt wats d z'tin n UV2 tat i'll hav 2 do so tat d d8a s takn n2 S1IN (aftr putin d xover cbl n plas)? ...

    sn tat ezr?