This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM Juno Board

For educational purposes, we would like to buy a Cortex-A based development board with exposed ETM/CoreSight pinout. The only board I am aware of is ARM Juno R2 which has such capabilitiy. However, I can not even find anything about where I can buy a Juno R2 board. Is there any idea on how to buy a Juno R2 or if there is any other ARM Cortex-A profile devboards which comes with a ETM/CoreSight port?

Parents
  • I think this platform may work, though as it is FPGA based, the CPU clock is rather slow, I believe 50MHz.

    Boards based on production silicon from Arm partners would run at production speeds (likely 1GHz+).. I would also expect these boards to be a lower cost, and readily available.

    It may be worth contacting a distributor (Digikey, Avnet, or similar) who would be more knowledgeable on boards from these vendors.

Reply
  • I think this platform may work, though as it is FPGA based, the CPU clock is rather slow, I believe 50MHz.

    Boards based on production silicon from Arm partners would run at production speeds (likely 1GHz+).. I would also expect these boards to be a lower cost, and readily available.

    It may be worth contacting a distributor (Digikey, Avnet, or similar) who would be more knowledgeable on boards from these vendors.

Children