This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Armpl 24.04 Installation issue

Unable to install the armpl 24.04 libraries on my windows machine. The error showing up states that processor is not supported.

Windows version : windows 11 22H2

Processor : AMD Ryzen5 3550H

Note: I have tried it on a windows 10 machine as well with an intel i5 processor.

Parents Reply Children
  • Hi Ronan,

    I require the use of NEON Intrinsics, BLAS/LAPACK APIs and libamath rng which is provided by Arm Performance Libraries. Please suggest how to use ARM PL or equivalent libraries for my use case.

    Regards,
    Deepan

  • Hi.

    I think the problem is we don't understand your set-up.  For example, what OS s running on the Cortex-A53 part of the FPGA?  How would you go about installing other software to run there?

    Chris

  • Hi Chris,

    Currently using the Xilink SDK/Vitis IDE (Windows version) to develop baremetal code on Cortex A53(Arm V8-A) of Zynq MPSoC (FPGA) . I have certain sections of the code that needs vectorization and computational optimization for which I require the use of ARM PL.

    Regards,
    Deepan

  • Hi.  

    Unfortunately I don't think we're going to be able to help you here.  ArmPL is intended for execution on a variety of platform: Linux, macOS and Windows.  If you are really after a baremetal or embedded use-case we don't think that this will help you.  You best bet is to contact Xilink and see if they can explain what you need to do.

    In terms of other libraries, you could use open source things like OpenBLAS and FFTW, but you will still need to know how to compile them appropriately and install them on the FPGA, which will be similar to the issue getting ArmPL on there.  I think you may be better off with the Vitis BLAS Library for FPGA: 

    https://www.xilinx.com/products/design-tools/vitis/vitis-libraries/vitis-blas.html

    Good luck!