This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM Energy Probe on Windows 7 64bit ?

Hello everyone,

I'm trying to use the ARM Energy Probe on a Windows 7 64bit but the driver does not want to install.

Do you have any idea or hint for this issue ? Could not find anything on the "Search" menu.

Thank you.

Regards,

Anthony Harivel

Parents
  • Hi Anthony,

    Plugging the Energy Probe in to my Windows 7 machine installed the drivers automatically, so I couldn't test the following suggestion, but it should work:

    You should just need to install the driver by right clicking the (I guess) unidentified device listed at port COMX in Device Manager and pointing the driver wizard at the file ARM_EnergyProbe.inf which is located here: C:\Program Files\DS-5\sw\energy_probe

    Device-Manager.png

    If this doesn't work, let me know and I'll see whether any of my colleagues have had the same issue.

    Thanks,

    Joe

Reply
  • Hi Anthony,

    Plugging the Energy Probe in to my Windows 7 machine installed the drivers automatically, so I couldn't test the following suggestion, but it should work:

    You should just need to install the driver by right clicking the (I guess) unidentified device listed at port COMX in Device Manager and pointing the driver wizard at the file ARM_EnergyProbe.inf which is located here: C:\Program Files\DS-5\sw\energy_probe

    Device-Manager.png

    If this doesn't work, let me know and I'll see whether any of my colleagues have had the same issue.

    Thanks,

    Joe

Children