Architectures and Processors forum simple bootloader implementation

State Accepted Answer
Locked Locked
Replies 1 reply
Subscribers 350 subscribers
Views 14299 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

simple bootloader implementation

segfault over 4 years ago

Hi,

I have used the i.MX8qm EVK and have tried the NXP provided yocto BSP and standalone bootloader packages.

Can anyone point to a minimalistic hello world bootloader implementation that I can run baremetal for the platform ?

Intent is to run an application on a Cortex-A. Thanks in advance.

Top replies

Zhifei Yang over 4 years ago +1 verified

The NXP ® i.MX 8MQuad Evaluation Kit (EVK) seems to be Armv8.0-A Cortex-A53 processors. Please take a look for Arm Trusted Firmware open source reference, which can act as Armv8-A bootloader - https...

+1 Zhifei Yang over 4 years ago

The NXP^® i.MX 8MQuad Evaluation Kit (EVK) seems to be Armv8.0-A Cortex-A53 processors.

Please take a look for Arm Trusted Firmware open source reference, which can act as Armv8-A bootloader

- https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/
Cancel
Up +1 Down

Cancel