• State Accepted Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 351 subscribers
  • Views 26156 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LEARNING | Development Boards

Chaitanya Reddy

Hi, 

I want to buy a development board to improve my skills in embedded & analog electronics area. 

  1. I am completely new to embedded world.  I wanted to become a pro in embedded programming. So the development board should help me in learning the embedded programming.
  2. I want to learn about different protocols(like SPI, I2C, I2S, LIN, etc.). The board should support these and I wanted to buy some of the sensors which support these protocols so that I can use them to try out my understanding on this. If the board itself have the sensors it is great.
  3. I want the board to be supported by ARM IAR. Which means I should be able to do debug using the Arm IAR. 
  4. Also I wanted to learn about ADCs, DACs. It would be great if the board can help in doing that.
  5. The board should use Arm processors.
  6. The board vendor should have proper documentation.
Parents
  • 0 in reply to Andy Neil

    Hi Andy, 

    Thanks for the reply. 

    • I have good experience in LabVIEW programming. I also worked with some hardware as well. But those doesn't belong to any of these embedded part. 
    • I also know C programming and basics of embedded programming. I can write quite a good code in it.
    • IAR because, it is being used by many companies. I have also gone through IAR embedded programming course.

    But I didn't know which board I can buy to apply my learning practically. (In specific I want to work with arm cortex series devices and learn about ADCs, DACs, Protocols, etc.. )

    Do you have any idea on startup board which I can buy and start using it. I have searched online on that. But there are many suggestions and I am not able to pick one. That is the reason I have posted in this community. 

Reply
  • 0 in reply to Andy Neil

    Hi Andy, 

    Thanks for the reply. 

    • I have good experience in LabVIEW programming. I also worked with some hardware as well. But those doesn't belong to any of these embedded part. 
    • I also know C programming and basics of embedded programming. I can write quite a good code in it.
    • IAR because, it is being used by many companies. I have also gone through IAR embedded programming course.

    But I didn't know which board I can buy to apply my learning practically. (In specific I want to work with arm cortex series devices and learn about ADCs, DACs, Protocols, etc.. )

    Do you have any idea on startup board which I can buy and start using it. I have searched online on that. But there are many suggestions and I am not able to pick one. That is the reason I have posted in this community. 

Children