This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem obtaining frame pointer in the call stack for STM32L4R9AI board

When I build my code with the following compiler option on STM32L4R9AI (Cortex M4) board with TizenRT (https://github.com/Samsung/TizenRT)

ARCHOPTIMIZATION += -fno-omit-frame-pointer -mapcs -mno-sched-prolog

I do not get a frame pointer (fp) for every call stack of the source code build.

When I take the object dump, I get following call stack >>

08000fb0 <stm32l4_dbgmonitor>:
8000fb0: b580 push {r7, lr}

Whereas, for cortex-R the object dump using the same compiler option (for artik053 board) looks as below >>

040c920c <s5j_clk_set_rate>:
40c920c: e1a0c00d mov ip, sp
40c9210: e92dd830 push {r4, r5, fp, ip, lr, pc}

I am currently using using gcc version 6.3.0.

Any pointers on this issue would be helpful.

Thanks & Regards,

Vidisha Thapa