Using ARM1176JZF-S Kit (DS-5 tools), I need to control stepper motor based on the output of ultrasonic sensor (which detects objects). I have already done the project in 8051 microcontrollers but how to do it in arm board. Let's first concentrate on the getting input from ultrasonic sensors. Please tell me where on the arm board do I need to connect the sensor. Please give some tips in writing the code( preferably in c). Can we implement this on software before hard ware implementation, if so how?
Thank you sir. Because of certain constraints, I have to do the project in this board only.Kindly elaborate the out-of -the-box options you were referring to. Please help me the best you with this project cause I am totally new to this and I have deadlines to meet.
> Kindly elaborate the out-of -the-box options you were referring to
As mentioned - all you really have are some generic GPIO pins which can be poked via the PL061 peripheral bock (see j39 in the diagram here: RealView Platform Baseboard for ARM1176JZF-S User Guide: 3.1.1. PCB layout), and higher-level connectivity options (serial, usb, ethernet).
Sir,
Is it possible to simulate before actually connecting the sensors and motors in DS-5 TOOLS?
From where / how to learn to do programs with the GPIOs?
Where can I find example programs that deal with GPIOs and timers?