I have the following doubts in AMBA 3 APB v1.0
1) How the APB slave generate PREADY is high /low?
2)What are all the factors APB slave have to consider while generating the PREADY is high /zero? Eg) PSELx, PENABLE, states etc
3) in figure 2-2,During the right transfer with wait states ,PSELx and PENABLE is high PREADY is low for 2 clock period. Why PREADY is low for 2 clock ? (ref Figure 2-2 Write transfer with wait states)
4)how to check the write /read transfer with wait states on simulation ?
5)in access state at what condition PREADY will be low ?