• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 89 subscribers
  • Views 2635 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DS-5: Can't find Cortex-A5x4 FVP after installing it

Nick S.

I have installed the Cortex-A5x4 FVP but I cannot find it in the DS-5 debug configuration. How can I run it?

Parents
  • +1

    This is not a known FVP in DS-5, and so you will need to create a new one. Don't worry, this is straight forward. Select File > New > Other, and locate Model Configuration



    Select (or create a new) configuration database in which to store this configuration

    Then locate where you have installed this model

    Config will be created (screenshot below taken with a different FVP, but procedure is the same) - edit name etc if appropriate, and click Import. This configuration will now be available for you to use as any other model configuration.

    Note this is a 'do once' task.

    Hope that helps

Reply
  • +1

    This is not a known FVP in DS-5, and so you will need to create a new one. Don't worry, this is straight forward. Select File > New > Other, and locate Model Configuration



    Select (or create a new) configuration database in which to store this configuration

    Then locate where you have installed this model

    Config will be created (screenshot below taken with a different FVP, but procedure is the same) - edit name etc if appropriate, and click Import. This configuration will now be available for you to use as any other model configuration.

    Note this is a 'do once' task.

    Hope that helps

Children
No data