• State Accepted Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 93 subscribers
  • Views 16436 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WSTRB calculation

Ravi V.

the scenario is like :

                        for AXI4 FIXED burst type i am calculating lower_byte_lane and upper byte lanes for this control information

                        start_addr = 0001;

                         Number_bytes = 4;

                         burst_length    = 4;

so now for the first transfer lower_byte_lane = 1 and upper_byte_lane = 3.

and for next transfers lower_byte_lane = 1 and upper_byte_lane = 4. why this lane value difference for FIXED burst type.AXI specification says that WSTRB value remains same for all transfers in FIXED burst.

0