Hi,
I just started with the Morello board, and after flashing the latest prebuilt on a USB memory, Linux wouldn't boot to home and hangs at SMP bringup which pointed me to
Morello: Pre-built images stall at "smp: Bringing up secondary CPUs"
Then I go the latest firmware prebuilt
https://git.morello-project.org/morello/board-firmware/-/tree/morello/mainline?ref_type=heads
And flashed it on the SD card as mentioned in
https://git.morello-project.org/morello/docs/-/blob/morello/mainline/firmware/user-guide.rst#id23
And now I can't reach UEFI boot menu and it hangs as follows:
add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/HttpDxe/HttpD0 Loading driver at 0x000F7F30000 EntryPoint=0x000F7F315DC HttpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/HttpBootDxe/H0 Loading driver at 0x000F7F17000 EntryPoint=0x000F7F185DC HttpBootDxe.efi ConvertPages: failed to find range 180000000 - 180022FFF Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Dri0 Loading driver at 0x000F7EED000 EntryPoint=0x000F7EEE2AC PlatformDxe.efi [PlatformDxe:I2cEnableBusConf]: requested bus speed 400000 != configured bus speed 386363 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/Drivers/L0 Loading driver at 0x000F7EE3000 EntryPoint=0x000F7EE44C4 LcdGraphicsOutputDxe.efi
Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Dri0 Loading driver at 0x000F7EED000 EntryPoint=0x000F7EEE2AC PlatformDxe.efi [PlatformDxe:I2cEnableBusConf]: requested bus speed 400000 != configured bus speed 386363 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/Drivers/L0 Loading driver at 0x000F7EE3000 EntryPoint=0x000F7EE44C4 LcdGraphicsOutputDxe.efi EDID block read interrupt not set InitializeDisplay: ERROR - Can not initialise the display. Exit Status=Time out EDID block read interrupt not set InitializeDisplay: ERROR - Can not initialise the display. Exit Status=Time out EDID block read interrupt not set InitializeDisplay: ERROR - Can not initialise the display. Exit Status=Time out
Hi Himanshu,
I flashed the full firmware as instructed in the user-guide.rst
$> sudo mount /dev/sdX1 /mnt $> sudo rm -rf /mnt/* $> sudo cp -r workspace/bsp/board-firmware/* /mnt/ $> sudo umount /mnt
I am using mainline prebuilt: commit 50e4c95 ("Merge branch 'morello/release-1.8' into 'morello/mainline'")
MCC log:
Cmd> Cmd> Cmd> reboot Rebooting... Disabling debug USB.. MCC to access SD card request acknowledged. Clear ULINK JTAG Board rebooting... Powering up system... MCC to access SD card request acknowledged. Clear ULINK JTAG Time : 03:02:15 Date : 05:11:2024 Programming Boot FLASH from \MB\HBI0364B\mbb_v233.ebf Device programmed: 0%Device programmed: 1%Device programmed: 3%Device programmed: 4%Device programmed: 6%Device programmed: 7%Device programmed: 9%Device programmed: 10%Device programmed: 12%Device programmed: 14%Device programmed: 15%Device programmed: 17%Device programmed: 18%Device programmed: 20%Device programmed: 21%Device programmed: 23%Device programmed: 24%Device programmed: 26%Device programmed: 28%Device programmed: 29%Device programmed: 31%Device programmed: 32%Device programmed: 34%Device programmed: 35%Device programmed: 37%Device programmed: 39%Device programmed: 40%Device programmed: 42%Device programmed: 43%Device programmed: 45%Device programmed: 46%Device programmed: 48%Device programmed: 49% Boot FLASH updated. Powering down... MCC to access SD card request acknowledged. SPI Write command to PCC: register 3 cmd 0xD003 tx data 0x1 SPI Return data from PCC: register 3 cmd 0x2000 rx data 0x0 Resetting board. Clear ULINK JTAG Arm M1SDP MCC Boot loader v1.0.0 HBI0364 build 641 MBbios update in progress DO NOT SWITCH OFF... Device programmed: 1%Device programmed: 3%Device programmed: 4%Device programmed: 6%Device programmed: 7%Device programmed: 9%Device programmed: 10%Device programmed: 12%Device programmed: 14%Device programmed: 15%Device programmed: 17%Device programmed: 18%Device programmed: 20%Device programmed: 21%Device programmed: 23%Device programmed: 25%Device programmed: 26%Device programmed: 28%Device programmed: 29%Device programmed: 31%Device programmed: 32%Device programmed: 34%Device programmed: 35%Device programmed: 37%Device programmed: 39%Device programmed: 40%Device programmed: 42%Device programmed: 43%Device programmed: 45%Device programmed: 46%Device programmed: 48%Device programmed: 50% MBbios update complete. MCC: Power On MCC to access SD card request acknowledged. Clear ULINK JTAG Time : 03:02:53 Date : 05:11:2024 Arm M1SDP MCC Firmware v2.3.3 Build Date: Jun 23 2023 Powering up system... MCC to access SD card request acknowledged. Clear ULINK JTAG Time : 03:02:58 Date : 05:11:2024 Switching on ATXPSU... Switching on main power... 12V Rail Check Pass Reading Board File \MB\HBI0364B\io_v010f.txt TOTAL OSCCLKS: 15 PMIC RAM configuration (80_1_86G.bin)... Temperature (deg C) Outlet = 28.2 PMIC = 33.9 SoC = 32.1 IN2 = 32.9 IN1 = 30.9 MidBrd = 33 PCIeSW = 30 MCC = 29.1 FPGA = 35.0 SoC Fan Speed = 9% ALERT off Configuring motherboard (rev B, var A)... Configuring FPGA from file \MB\HBI0364B\io_v010f.bit Address: 0x00000000Address: 0x00020000Address: 0x00040000Address: 0x00060000Address: 0x00080000Address: 0x000A0000Address: 0x000C0000Address: 0x000E0000Address: 0x00100000Address: 0x00120000Address: 0x00140000Address: 0x00160000Address: 0x00180000Address: 0x001A0000Address: 0x001C0000Address: 0x001E0000Address: 0x00200000Address: 0x00220000Address: 0x00240000Address: 0x00260000Address: 0x00280000Address: 0x002A0000Address: 0x002C0000Address: 0x002E0000Address: 0x00300000Address: 0x00320000Address: 0x00340000Address: 0x00360000Address: 0x00380000Address: 0x003A0000Address: 0x003C0000Address: 0x003E0000Address: 0x00400000Address: 0x00420000Address: 0x00440000Address: 0x00460000Address: 0x00480000Address: 0x004A0000Address: 0x004C0000Address: 0x004E0000Address: 0x00500000Address: 0x00520000Address: 0x00540000Address: 0x00560000Address: 0x00580000Address: 0x005A0000Address: 0x005C0000Address: 0x005E0000Address: 0x00600000Address: 0x00620000Address: 0x00640000Address: 0x00660000Address: 0x00680000Address: 0x006A0000Address: 0x006C0000Address: 0x006E0000Address: 0x00700000Address: 0x00720000Address: 0x00740000Address: 0x00760000Address: 0x00780000Address: 0x007A0000Address: 0x007C0000Address: 0x007E0000 FPGA configuration complete. Config clocks num: 15 OSCCLK0 : 50.000000MHz OSCCLK1 : 50.000000MHz OSCCLK2 : 50.000000MHz OSCCLK3 : 50.000000MHz OSCCLK4 : 50.000000MHz OSCCLK5 : 50.000000MHz OSCCLK6 : 50.000000MHz OSCCLK7 : 50.000000MHz OSCCLK8 : 75.000000MHz OSCCLK9 : 85.000000MHz OSCCLK10 : 12.288000MHz OSCCLK11 : 50.000000MHz OSCCLK12 : 50.000000MHz OSCCLK13 : 50.000000MHz OSCCLK14 : 170.000000MHz OSCCLK setup: PASSED GTXCLK setup: PASSED EEPROM config found File to compare \MB\HBI0364B\pci_v002.bin \MB\HBI0364B\pci_v002.bin UPDATE IN PROGRESS PCIe PEX I2C configuration PCIe I2C R/W test passed... Reading PCIe EEPROM file \MB\HBI0364B\pci_v002.bin DMA TX Handler Address: 0x00000000Address: 0x00000001Address: 0x00000002Address: 0x00000003Address: 0x00000004Address: 0x00000005Address: 0x00000006Address: 0x00000007Address: 0x00000008Address: 0x00000009Address: 0x0000000AAddress: 0x0000000BAddress: 0x0000000CAddress: 0x0000000DAddress: 0x0000000EAddress: 0x0000000FAddress: 0x00000010Address: 0x00000011Address: 0x00000012Address: 0x00000013Address: 0x00000014Address: 0x00000015Address: 0x00000016Address: 0x00000017 PCIe EEPROM programmed Writing SCC 0x014 with ACLK 50000000 Hz Writing SCC 0x00C with 0x00000003 Writing SCC 0x020 with 0x11090805 Writing SCC 0x024 with 0x06060606 Writing SCC 0x028 with 0x00000606 Writing SCC 0x1160 with 0x00000001 Writing SCC 0x1164 with 0x01000000 Writing SCC 0x1168 with 0x00000000 Writing SCC 0x116C with 0x00000000 Writing SCC 0x1180 with 0x00000000 Writing SCC 0x1184 with 0x0000000C Writing SCC 0x1188 with 0x00000000 Writing SCC 0x118C with 0x00000000 Writing SCC 0x1190 with 0x00000000 Writing SCC 0x1194 with 0x00000000 Writing SCC 0x1198 with 0x00000000 Writing SCC 0x119C with 0x00000000 Reading SCC 0xFF8 with 0x0A364A08 Reading SCC 0xFFC with 0x41050000 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 Updating SCP qspi with PCC bios ...... File \MB\HBI0364B\pcc_v057.bin written to MCC memory address 0x65F00000 DMA TX Handler PCC Bios updated from \MB\HBI0364B\pcc_v057.bin Waiting for PCC to copy boot loader from QSPI... Powering down... MCC to access SD card request acknowledged. Resetting board. Clear ULINK JTAG Arm M1SDP MCC Boot loader v1.0.0 HBI0364 build 641 MCC: Power On MCC to access SD card request acknowledged. Clear ULINK JTAG Time : 03:03:41 Date : 05:11:2024 Arm M1SDP MCC Firmware v2.3.3 Build Date: Jun 23 2023 Powering up system... MCC to access SD card request acknowledged. Clear ULINK JTAG Time : 03:03:46 Date : 05:11:2024 Switching on ATXPSU... Switching on main power... 12V Rail Check Pass Reading Board File \MB\HBI0364B\io_v010f.txt TOTAL OSCCLKS: 15 PMIC RAM configuration (80_1_86G.bin)... Temperature (deg C) Outlet = 27.9 PMIC = 33.4 SoC = 30.9 IN2 = 31.9 IN1 = 30.3 MidBrd = 33 PCIeSW = 33 MCC = 28.9 FPGA = 34.7 SoC Fan Speed = 9% ALERT off Configuring motherboard (rev B, var A)... Configuring FPGA from file \MB\HBI0364B\io_v010f.bit Address: 0x00000000Address: 0x00020000Address: 0x00040000Address: 0x00060000Address: 0x00080000Address: 0x000A0000Address: 0x000C0000Address: 0x000E0000Address: 0x00100000Address: 0x00120000Address: 0x00140000Address: 0x00160000Address: 0x00180000Address: 0x001A0000Address: 0x001C0000Address: 0x001E0000Address: 0x00200000Address: 0x00220000Address: 0x00240000Address: 0x00260000Address: 0x00280000Address: 0x002A0000Address: 0x002C0000Address: 0x002E0000Address: 0x00300000Address: 0x00320000Address: 0x00340000Address: 0x00360000Address: 0x00380000Address: 0x003A0000Address: 0x003C0000Address: 0x003E0000Address: 0x00400000Address: 0x00420000Address: 0x00440000Address: 0x00460000Address: 0x00480000Address: 0x004A0000Address: 0x004C0000Address: 0x004E0000Address: 0x00500000Address: 0x00520000Address: 0x00540000Address: 0x00560000Address: 0x00580000Address: 0x005A0000Address: 0x005C0000Address: 0x005E0000Address: 0x00600000Address: 0x00620000Address: 0x00640000Address: 0x00660000Address: 0x00680000Address: 0x006A0000Address: 0x006C0000Address: 0x006E0000Address: 0x00700000Address: 0x00720000Address: 0x00740000Address: 0x00760000Address: 0x00780000Address: 0x007A0000Address: 0x007C0000Address: 0x007E0000 FPGA configuration complete. Config clocks num: 15 OSCCLK0 : 50.000000MHz OSCCLK1 : 50.000000MHz OSCCLK2 : 50.000000MHz OSCCLK3 : 50.000000MHz OSCCLK4 : 50.000000MHz OSCCLK5 : 50.000000MHz OSCCLK6 : 50.000000MHz OSCCLK7 : 50.000000MHz OSCCLK8 : 75.000000MHz OSCCLK9 : 85.000000MHz OSCCLK10 : 12.288000MHz OSCCLK11 : 50.000000MHz OSCCLK12 : 50.000000MHz OSCCLK13 : 50.000000MHz OSCCLK14 : 170.000000MHz OSCCLK setup: PASSED GTXCLK setup: PASSED EEPROM config found File to compare \MB\HBI0364B\pci_v002.bin \MB\HBI0364B\pci_v002.bin Writing SCC 0x014 with ACLK 50000000 Hz Writing SCC 0x00C with 0x00000003 Writing SCC 0x020 with 0x11090805 Writing SCC 0x024 with 0x06060606 Writing SCC 0x028 with 0x00000606 Writing SCC 0x1160 with 0x00000001 Writing SCC 0x1164 with 0x01000000 Writing SCC 0x1168 with 0x00000000 Writing SCC 0x116C with 0x00000000 Writing SCC 0x1180 with 0x00000000 Writing SCC 0x1184 with 0x0000000C Writing SCC 0x1188 with 0x00000000 Writing SCC 0x118C with 0x00000000 Writing SCC 0x1190 with 0x00000000 Writing SCC 0x1194 with 0x00000000 Writing SCC 0x1198 with 0x00000000 Writing SCC 0x119C with 0x00000000 Reading SCC 0xFF8 with 0x0A364A08 Reading SCC 0xFFC with 0x41050000 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 QSPI Controller detected id = 0x4000303 Device ID 0x20, 0xBB, 0x19 Setting QSPI dummy clocks... Dummy clocks already set Device ID 0x20, 0xBB, 0x19 Reading images file \MB\HBI0364B\images.txt Updating MCP file . File \SOFTWARE\mcp_fw.bin written to MCC memory address 0x64000000 DMA TX Handler Image: mcp_fw updated from \SOFTWARE\mcp_fw.bin Updating SCP file ...... File \SOFTWARE\scp_fw.bin written to MCC memory address 0x64000000 DMA TX Handler Image: scp_fw updated from \SOFTWARE\scp_fw.bin Updating AP QSPI file ........................................................................................ File \SOFTWARE\fip.bin written to MCC memory address 0x66000000 DMA TX Handler Image: fip updated from \SOFTWARE\fip.bin PCIe NIC MAC address = 0002 F70094D0 PCC MAC address = 0002 F70094CF LAN9221 was identified successfully. MAC addrs test: PASSED SMC MAC address 0002-F700-94D1 Identifying DDR 0 Device Information Manufacturer ID = 80 2C Module Part Number = 9ASF1G72PZ-2G9E1 Module Serial Number = F2 67 E5 3E Identifying DDR 1 Device Information Manufacturer ID = 80 2C Module Part Number = 9ASF1G72PZ-2G9E1 Module Serial Number = F2 67 CF 48 Setting System LEDs[7:4] Setting PCIe_nPERST/PCIESW_PERSTN PCIe control C2C disabled APUART0 connected to USBPORT_3 SCPUART connected to USBPORT_4 MCPUART connected to USBPORT_5 PL031 Date & Time set = Tue Nov 5 03:04:44 2024 QSPI test (0x6403FEF8):0x5144F641 Releasing SOC_nPOR/SOC_nSRST Setting I2C_MUX to SCP USB Serial Number = 500540992008 Cmd>
SCP log:
[ 0.000000] ___ ___ ___ __ _ [ 0.000000] / __|/ __| _ \___ / _(_)_ _ _ ____ __ ____ _ _ _ ___ [ 0.000000] \__ | (__| _|___| _| | '_| ' \ V V / _` | '_/ -_) [ 0.000000] |___/\___|_| |_| |_|_| |_|_|_\_/\_/\__,_|_| \___| [ 0.000000] [ 0.000000] v2.7.0_2020-11-19_07-20-34-d49e1335 [ 0.000000] [ 0.000000] [FWK] Module initialization complete! [ 0.000000] [ROM] Trying to identify FIP at 0x30000000 [ 0.000000] [ROM] Located SCP_BL2: [ 0.000000] [ROM] address: 0x30000060 [ 0.000000] [ROM] size : 177052 [ 0.000000] [ROM] flags : 0x0000000000000000 [ 0.000000] [ROM] Copying SCP_BL2 to ITCRAM...! [ 0.000000] [ROM] Done! [ 0.000000] [ROM] Jumping to SCP_BL2 [ 0.000000] ___ ___ ___ __ _ [ 0.000000] / __|/ __| _ \___ / _(_)_ _ _ ____ __ ____ _ _ _ ___ [ 0.000000] \__ | (__| _|___| _| | '_| ' \ V V / _` | '_/ -_) [ 0.000000] |___/\___|_| |_| |_|_| |_|_|_\_/\_/\__,_|_| \___| [ 0.000000] [ 0.000000] 1.8_c0d655b [ 0.000000] [ 0.000000] [CMN_SKEENA] Multichip mode: no [ 0.000000] [CMN_SKEENA] Chip ID: 0 [ 0.000000] [PVT] Morello Sensor Library version 2.0 [ 0.000000] [PVT] Started driver version 1.0 [ 0.000000] [MORELLO SYSTEM] Requesting SYSTOP initialization... [ 0.000000] [FWK] Module initialization complete! [ 0.000000] [CMN_SKEENA] Starting discovery... [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (4, 1) ID:264, LID:9 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (4, 0) ID:256, LID:4 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (3, 1) ID:200, LID:8 [ 0.000000] [CMN_SKEENA] HN-F ID:200, LID:3 @0x71900000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (3, 0) ID:192, LID:3 [ 0.000000] [CMN_SKEENA] HN-F ID:196, LID:1 @0x71804000 [ 0.000000] [CMN_SKEENA] Found external node ID: 192 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (2, 1) ID:136, LID:7 [ 0.000000] [CMN_SKEENA] Found external node ID: 140 [ 0.000000] [CMN_SKEENA] HN-F ID:136, LID:2 @0x71100000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (2, 0) ID:128, LID:2 [ 0.000000] [CMN_SKEENA] HN-F ID:132, LID:0 @0x71004000 [ 0.000000] [CMN_SKEENA] SBSX ID:128, LID:0 @0x71000000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (1, 1) ID:72, LID:6 [ 0.000000] [CMN_SKEENA] Found CXLA at node ID: 78 [ 0.000000] [CMN_SKEENA] RN-SAM ID:76, LID:0 @0x70954000 [ 0.000000] [CMN_SKEENA] CXHA ID:76, LID:0 @0x70914000 [ 0.000000] [CMN_SKEENA] CXRA ID:76, LID:0 @0x70904000 [ 0.000000] [CMN_SKEENA] HN-I ID:72, LID:1 @0x70910000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (1, 0) ID:64, LID:1 [ 0.000000] [CMN_SKEENA] HN-I ID:68, LID:0 @0x70854000 [ 0.000000] [CMN_SKEENA] DTC ID:68, LID:0 @0x70834000 [ 0.000000] [CMN_SKEENA] DVM ID:68, LID:0 @0x70824000 [ 0.000000] [CMN_SKEENA] RN-SAM ID:64, LID:0 @0x70820000 [ 0.000000] [CMN_SKEENA] RN-D ID:64, LID:2 @0x70810000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (0, 1) ID:8, LID:5 [ 0.000000] [CMN_SKEENA] RN-SAM ID:12, LID:0 @0x70124000 [ 0.000000] [CMN_SKEENA] RN-D ID:12, LID:4 @0x70114000 [ 0.000000] [CMN_SKEENA] RN-SAM ID:8, LID:0 @0x70120000 [ 0.000000] [CMN_SKEENA] RN-D ID:8, LID:3 @0x70110000 [ 0.000000] [CMN_SKEENA] [ 0.000000] [CMN_SKEENA] XP (0, 0) ID:0, LID:0 [ 0.000000] [CMN_SKEENA] RN-SAM ID:4, LID:0 @0x70024000 [ 0.000000] [CMN_SKEENA] RN-D ID:4, LID:1 @0x70014000 [ 0.000000] [CMN_SKEENA] RN-SAM ID:0, LID:0 @0x70020000 [ 0.000000] [CMN_SKEENA] RN-D ID:0, LID:0 @0x70010000 [ 0.000000] [CMN_SKEENA] Total internal RN-SAM nodes: 6 [ 0.000000] [CMN_SKEENA] Total external RN-SAM nodes: 2 [ 0.000000] [CMN_SKEENA] Total HN-F nodes: 4 [ 0.000000] [CMN_SKEENA] Total RN-F nodes: 2 [ 0.000000] [CMN_SKEENA] Total RN-D nodes: 5 [ 0.000000] [CMN_SKEENA] Total RN-I nodes: 0 [ 0.000000] [CMN_SKEENA] CCIX CXLA node at: 0x70924000 [ 0.000000] [CMN_SKEENA] CCIX CXRA node at: 0x70904000 [ 0.000000] [CMN_SKEENA] CCIX CXHA node at: 0x70914000 [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 76 at 0x70954000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 64 at 0x70820000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 12 at 0x70124000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 8 at 0x70120000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 4 at 0x70024000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Configuring RN-SAM for node id 0 at 0x70020000 [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.000000] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.000000] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.000000] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX [ 0.000000] [CMN_SKEENA] Done [ 0.000000] [APContext] Zeroing AP context area [0xa4000fc0 - 0xa4001000] [ 0.000000] [DDR] Starting DDR subsystem initialization at 1466 MHz [ 0.000000] [DDR] Identifying connected DIMM cards... [ 0.000000] DIMM 0 information: [ 0.000000] Manufacturer ID = 0x80 0x2c [ 0.000000] Module part number = 9ASF1G72PZ-2G9E1 $$ [ 0.000000] Module serial number = 0xf2 0x67 0xe5 0x3e [ 0.000000] Module manufacturing week 20 year 21 [ 0.000000] DIMM 1 information: [ 0.000000] Manufacturer ID = 0x80 0x2c [ 0.000000] Module part number = 9ASF1G72PZ-2G9E1 $$ [ 0.000000] Module serial number = 0xf2 0x67 0xcf 0x48 [ 0.000000] Module manufacturing week 20 year 21 [ 0.000000] [DDR] Initialising DMC-Bing at 0x4e000000 [ 0.000000] [DDR] Configuring interrupts for DMC0 [ 0.000000] [DDR] Writing functional settings [ 0.000000] [DDR-PHY] Initializing PHY at 0x0x50604000 for 1466 MHz speed [ 0.000000] [DDR] Sending direct DDR commands [ 0.000000] [DDR] Training DDR memories... [ 0.000000] [DDR] Write leveling rank 1... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Read gate training [ 0.000000] [DDR] A side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Read eye training [ 0.000000] [DDR] A side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] B side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] MC initiated update... [ 0.000000] [DDR] PASS [ 0.000000] [DDR-PHY] Post training PHY setting at 0x50604000 [ 0.000000] [DDR-PHY] Performing write eye training... [ 0.000000] [DDR-PHY] PASS! [ 0.000000] [DDR] Enable DIMM refresh... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Setting DMC to READY mode [ 0.000000] [DDR] DMC init done. [ 0.000000] [DDR] Initialising DMC-Bing at 0x4e100000 [ 0.000000] [DDR] Configuring interrupts for DMC1 [ 0.000000] [DDR] Writing functional settings [ 0.000000] [DDR-PHY] Initializing PHY at 0x0x50614000 for 1466 MHz speed [ 0.000000] [DDR] Sending direct DDR commands [ 0.000000] [DDR] Training DDR memories... [ 0.000000] [DDR] Write leveling rank 1... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Read gate training [ 0.000000] [DDR] A side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Read eye training [ 0.000000] [DDR] A side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] B side... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] MC initiated update... [ 0.000000] [DDR] PASS [ 0.000000] [DDR-PHY] Post training PHY setting at 0x50614000 [ 0.000000] [DDR-PHY] Performing write eye training... [ 0.000000] [DDR-PHY] PASS! [ 0.000000] [DDR] Enable DIMM refresh... [ 0.000000] [DDR] PASS [ 0.000000] [DDR] Setting DMC to READY mode [ 0.000000] [DDR] DMC init done. [ 0.000000] [DDR] Verifying PHY status for DMC 0... [ 0.000000] [DDR] Done [ 0.000000] [DDR] Verifying PHY status for DMC 1... [ 0.000000] [DDR] Done [ 0.000000] [PCIe] Powering ON controller... [ 0.004050] [PCIe] Timeout! [ 0.006834] [FWK] Process event ([NOT 17:0]: [ELM 17:0] -> [ELM 34:0]) (-7) [ 0.013758] [CCIX] Powering ON controller... [ 0.018023] [CCIX] Timeout! [ 0.020809] [FWK] Process event ([NOT 17:0]: [ELM 17:0] -> [ELM 34:1]) (-7) [ 0.027733] [MORELLO SYSTEM] Setting AP Reset Address to 0x0000000000000000 [ 0.034688] [MORELLO SYSTEM] Collecting Platform information... [ 0.040580] [MORELLO SYSTEM] Total usable DDR size: 16384MB [ 0.050644] [MORELLO SYSTEM] Collecting Firmware version information... [ 0.054380] [MORELLO SYSTEM] Fetching PCC firmware version [ 0.064354] [MORELLO SYSTEM] Fetching MCC firmware version [ 0.071472] [MORELLO SYSTEM] Enabling CoreSight debug non-secure access [ 0.075214] [MORELLO SYSTEM] Temp of CLUS0 = 30C, CLUS1 = 30C, SYS = 29C [ 0.081891] [MORELLO SYSTEM] Booting primary core at 2600 MHz... [ 0.087908] [CMN_SKEENA] Configuring RN-SAM for node id 192 at 0x71800000 [ 0.094651] [CMN_SKEENA] [0x0000000000000000 - 0x000007FFFFFFFFFF] System [ 0.101683] [CMN_SKEENA] [0x0000000000000000 - 0x0000000007FFFFFF] Sub-Sys [ 0.108712] [CMN_SKEENA] [0x0000000008000000 - 0x000000000FFFFFFF] I/O [ 0.115398] [CMN_SKEENA] [0x0000000010000000 - 0x000000001FFFFFFF] I/O [ 0.122082] [CMN_SKEENA] [0x0000000020000000 - 0x000000003FFFFFFF] I/O [ 0.128766] [CMN_SKEENA] [0x0000000040000000 - 0x000000005FFFFFFF] I/O [ 0.135449] [CMN_SKEENA] [0x0000000060000000 - 0x000000006FFFFFFF] I/O [ 0.142133] [CMN_SKEENA] [0x0000000070000000 - 0x000000007FFFFFFF] I/O [ 0.148816] [CMN_SKEENA] [0x0000000400000000 - 0x00000007FFFFFFFF] I/O [ 0.155500] [CMN_SKEENA] [0x0000000800000000 - 0x0000000FFFFFFFFF] I/O [ 0.162184] [CMN_SKEENA] [0x0000001000000000 - 0x0000001FFFFFFFFF] I/O [ 0.168867] [CMN_SKEENA] [0x0000002000000000 - 0x00000027FFFFFFFF] I/O [ 0.175551] [CMN_SKEENA] [0x0000002800000000 - 0x0000002FFFFFFFFF] I/O [ 0.182234] [CMN_SKEENA] [0x0000003000000000 - 0x0000003FFFFFFFFF] I/O [ 0.188918] [CMN_SKEENA] [0x0000004000000000 - 0x0000004FFFFFFFFF] I/O [ 0.195602] [CMN_SKEENA] [0x0000005000000000 - 0x0000005FFFFFFFFF] System [ 0.202633] [CMN_SKEENA] [0x0000006000000000 - 0x0000007FFFFFFFFF] System [ 0.209664] [CMN_SKEENA] [0x0000008000000000 - 0x000000807FFFFFFF] System [ 0.216695] [CMN_SKEENA] [0x0000040000000000 - 0x000007FFFFFFFFFF] CCIX
AP log:
NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.4(debug):37a5f702b NOTICE: BL1: Built : 14:51:05, Jan 27 2021 INFO: BL1: RAM 0x4074000 - 0x407f000 INFO: Using crypto library 'mbed TLS' INFO: Loading image id=6 at address 0x4001010 INFO: Image id=6 loaded: 0x4001010 - 0x40014ce INFO: Loading image id=31 at address 0x4001010 INFO: Image id=31 loaded: 0x4001010 - 0x400119c INFO: FCONF: Config file with image ID:31 loaded at address = 0x4001010 INFO: Loading image id=24 at address 0x4001300 INFO: Image id=24 loaded: 0x4001300 - 0x40013e8 INFO: FCONF: Config file with image ID:24 loaded at address = 0x4001300 INFO: BL1: Loading BL2 INFO: Loading image id=1 at address 0x4057000 INFO: Image id=1 loaded: 0x4057000 - 0x406b961 NOTICE: BL1: Booting BL2 INFO: Entry point address = 0x4057000 INFO: SPSR = 0x3c5 INFO: FCONF: Reading FW_CONFIG firmware configuration file from: 0x4001010 INFO: FCONF: Reading firmware configuration information for: dyn_cfg INFO: FCONF: Reading TB_FW firmware configuration file from: 0x4001300 INFO: FCONF: Reading firmware configuration information for: tbbr NOTICE: BL2: 1.8_02f8715 NOTICE: BL2: Built : 12:02:04, Mar 6 2024 INFO: Using crypto library 'mbed TLS' WARNING: FCONF: Invalid config id 25 INFO: BL2: Doing platform setup INFO: SDS: Detected SDS Memory Region (3520 bytes) INFO: Total DIMM size: 16GB INFO: Zeroing DDR memory range 0x80000000 - 0xFFFFFFFF INFO: Zeroing DDR memory range 0x8080000000 - 0x8400000000 INFO: Configuring DMC Bing in server mode INFO: Enabling ECC on DMCs INFO: BL2: Loading image id 3 INFO: Loading image id=7 at address 0xff000000 INFO: Image id=7 loaded: 0xff000000 - 0xff000616 INFO: Loading image id=9 at address 0xff000000 INFO: Image id=9 loaded: 0xff000000 - 0xff0004e2 INFO: Loading image id=13 at address 0xff000000 INFO: Image id=13 loaded: 0xff000000 - 0xff000438 INFO: Loading image id=3 at address 0xff000000 INFO: Image id=3 loaded: 0xff000000 - 0xff00c164 INFO: BL2: Loading image id 23 INFO: Loading image id=6 at address 0xfeff8000 INFO: Image id=6 loaded: 0xfeff8000 - 0xfeff84be INFO: Loading image id=23 at address 0xfeff8000 INFO: Image id=23 loaded: 0xfeff8000 - 0xfeffbe3c INFO: BL2: Skip loading image id 25 INFO: BL2: Loading image id 5 INFO: Loading image id=11 at address 0xe0000000 INFO: Image id=11 loaded: 0xe0000000 - 0xe00004f2 INFO: Loading image id=15 at address 0xe0000000 INFO: Image id=15 loaded: 0xe0000000 - 0xe0000448 INFO: Loading image id=5 at address 0xe0000000 INFO: Image id=5 loaded: 0xe0000000 - 0xe0200000 INFO: BL2: Loading image id 27 INFO: Loading image id=27 at address 0xfef00000 INFO: Image id=27 loaded: 0xfef00000 - 0xfef001f0 INFO: SDS: Detected SDS Memory Region (3520 bytes) NOTICE: BL1: Booting BL31 INFO: Entry point address = 0xff000000 INFO: SPSR = 0x3cd NOTICE: BL31: 1.8_02f8715 NOTICE: BL31: Built : 12:02:04, Mar 6 2024 INFO: SDS: Detected SDS Memory Region (3520 bytes) INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: Maximum SPI INTID supported: 991 INFO: Initializing SCMI driver on channel 0 INFO: SCMI driver initialized INFO: BL31: Initializing runtime services INFO: BL31: rainier: CPU workaround for erratum 1868343 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xe0000000 INFO: SPSR = 0x3c9 UEFI firmware (version 1.8_3bf9a27:1.8_dc71a37 built at 12:02:29 on Mar 6 2024) add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore/DEBUG/ArmPlatformPrePeiCore.dll 0xE000F800 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/Pei/PeiMain/DEBUG/PeiCore.dll 0xE0020240 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/PCD/Pei/Pcd/DEBUG/PcdPeim.dll 0xE0034240 Loading PEIM at 0x000E0034160 EntryPoint=0x000E0034298 PcdPeim.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/MorelloNtFwConfigPei/Soc/DEBUG/MorelloSocNtFwConfigPei.dll 0xE0042240 Loading PEIM at 0x000E0042160 EntryPoint=0x000E0042290 MorelloSocNtFwConfigPei.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim/DEBUG/MemoryInit.dll 0xE0005400 Loading PEIM at 0x000E0005160 EntryPoint=0x000E0005A50 MemoryInit.efi Memory Init PEIM Loaded Memory Map ---------------------------------------------------------- Description : START - END [ SIZE ] { ATTR } Generic Watchdog : 0x000000002A440000 - 0x000000002A45FFFF [ 0x0000000000020000 ] { WRITE_THROUGH } REFCLK CNTRead : 0x000000002A800000 - 0x000000002A80FFFF [ 0x0000000000010000 ] { WRITE_THROUGH } AP_REFCLK CNTCL : 0x000000002A810000 - 0x000000002A81FFFF [ 0x0000000000010000 ] { WRITE_THROUGH } AP_REFCLK_NS CNTCTL : 0x000000002A830000 - 0x000000002A83FFFF [ 0x0000000000010000 ] { WRITE_THROUGH } GIC-600 : 0x0000000030000000 - 0x000000003003FFFF [ 0x0000000000040000 ] { WRITE_THROUGH } GICITS-600 : 0x0000000030040000 - 0x00000000300BFFFF [ 0x0000000000080000 ] { WRITE_THROUGH } GICR-600 : 0x00000000300C0000 - 0x00000000301BFFFF [ 0x0000000000100000 ] { WRITE_THROUGH } SMMU : 0x000000004F000000 - 0x000000004FFFFFFF [ 0x0000000001000000 ] { WRITE_THROUGH } non-secure SRAM : 0x0000000006000000 - 0x000000000600FFFF [ 0x0000000000010000 ] { UNCACHED_UNBUFFERED } UART0 : 0x000000002A400000 - 0x000000002A40FFFF [ 0x0000000000010000 ] { WRITE_THROUGH } Mali D-32 : 0x000000002CC00000 - 0x000000002CEFFFFF [ 0x0000000000300000 ] { WRITE_THROUGH } DDR Primary : 0x0000000080000000 - 0x00000000FDFFFFFF [ 0x000000007E000000 ] { NONSECURE_UNCACHED_UNBUFFERED } DDR GOP carve out : 0x00000000FE000000 - 0x00000000FEFFFFFF [ 0x0000000001000000 ] { UNCACHED_UNBUFFERED } DDR Secondary : 0x0000008080000000 - 0x00000083FFFFFFFF [ 0x0000000380000000 ] { NONSECURE_UNCACHED_UNBUFFERED } AP QSPI flash device : 0x000000001A000000 - 0x000000001BFFFFFF [ 0x0000000002000000 ] { WRITE_THROUGH } Expansion Peripherals : 0x000000001C000000 - 0x000000001D2FFFFF [ 0x0000000001300000 ] { WRITE_THROUGH } PCIe ECAM Region : 0x00000028C0000000 - 0x00000028CFFFFFFF [ 0x0000000010000000 ] { WRITE_THROUGH } PCIe MMIO32 & IO Region : 0x0000000060000000 - 0x000000006F3FFFFF [ 0x000000000F400000 ] { WRITE_THROUGH } PCIe MMIO64 Region : 0x0000000900000000 - 0x00000028BFFFFFFF [ 0x0000001FC0000000 ] { WRITE_THROUGH } CCIX ECAM Region : 0x0000004FC0000000 - 0x0000004FCFFFFFFF [ 0x0000000010000000 ] { WRITE_THROUGH } CCIX MMIO32 & IO Region : 0x0000000070000000 - 0x000000007F3FFFFF [ 0x000000000F400000 ] { WRITE_THROUGH } CCIX MMIO64 Region : 0x0000003000000000 - 0x0000004FBFFFFFFF [ 0x0000001FC0000000 ] { WRITE_THROUGH } Virtual Memory Table setup complete. add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/Pei/PeiMain/DEBUG/PeiCore.dll 0xFDFDD240 Loading PEIM at 0x000FDFDD160 EntryPoint=0x000FDFDD2E0 PeiCore.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/PCD/Pei/Pcd/DEBUG/PcdPeim.dll 0xFDFD5240 Loading PEIM at 0x000FDFD5160 EntryPoint=0x000FDFD5298 PcdPeim.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/PlatformPei/PlatformPeim/DEBUG/PlatformPei.dll 0xFDFD2240 Loading PEIM at 0x000FDFD2160 EntryPoint=0x000FDFD2290 PlatformPei.efi Platform PEIM Loaded add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/DxeIplPeim/DxeIpl/DEBUG/DxeIpl.dll 0xFDFC8240 Loading PEIM at 0x000FDFC8160 EntryPoint=0x000FDFC8298 DxeIpl.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/MorelloHwConfigPei/MorelloHwConfigPei/DEBUG/MorelloHwConfigPei.dll 0xFD7AB240 Loading PEIM at 0x000FD7AB160 EntryPoint=0x000FD7AB290 MorelloHwConfigPei.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/CpuPei/CpuPei/DEBUG/CpuPei.dll 0xFD7A2400 Loading PEIM at 0x000FD7A2160 EntryPoint=0x000FD7A2800 CpuPei.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xFD751000 Loading PEIM at 0x000FD750000 EntryPoint=0x000FD752808 DxeCore.efi Loading DXE CORE at 0x000FD750000 EntryPoint=0x000FD752808 ReplaceTableEntry: splitting block entry with MMU disabled add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xFD751000 HOBLIST address in DXE = 0xFD4EC018 Memory Allocation 0x00000004 0xE0000000 - 0xE01FFFFF Memory Allocation 0x00000004 0xFDFFF000 - 0xFDFFFFFF Memory Allocation 0x00000004 0xFDFFE000 - 0xFDFFEFFF Memory Allocation 0x00000004 0xFDFFD000 - 0xFDFFDFFF Memory Allocation 0x00000004 0xFDFFC000 - 0xFDFFCFFF Memory Allocation 0x00000004 0xFDFFB000 - 0xFDFFBFFF Memory Allocation 0x00000004 0xFDFFA000 - 0xFDFFAFFF Memory Allocation 0x00000004 0xFDFF9000 - 0xFDFF9FFF Memory Allocation 0x00000004 0xFDFF8000 - 0xFDFF8FFF Memory Allocation 0x00000004 0xFDFF7000 - 0xFDFF7FFF Memory Allocation 0x00000004 0xFDFF6000 - 0xFDFF6FFF Memory Allocation 0x00000004 0xFDFF5000 - 0xFDFF5FFF Memory Allocation 0x00000004 0xFDFF4000 - 0xFDFF4FFF Memory Allocation 0x00000004 0xFDFF3000 - 0xFDFF3FFF Memory Allocation 0x00000004 0xFDFF2000 - 0xFDFF2FFF Memory Allocation 0x00000004 0xFDFF1000 - 0xFDFF1FFF Memory Allocation 0x00000004 0xFD730000 - 0xFD74FFFF Memory Allocation 0x00000003 0xFDFDD000 - 0xFDFF0FFF Memory Allocation 0x00000003 0xFDFD5000 - 0xFDFDCFFF Memory Allocation 0x00000003 0xFDFD2000 - 0xFDFD4FFF Memory Allocation 0x00000003 0xFDFC8000 - 0xFDFD1FFF Memory Allocation 0x00000004 0xFDFB8000 - 0xFDFC7FFF Memory Allocation 0x00000004 0xFD7AF000 - 0xFDFB7FFF Memory Allocation 0x00000003 0xFD7AB000 - 0xFD7AEFFF Memory Allocation 0x00000004 0xFD7A7000 - 0xFD7AAFFF Memory Allocation 0x00000003 0xFD7A2000 - 0xFD7A6FFF Memory Allocation 0x00000003 0xFD750000 - 0xFD7A1FFF Memory Allocation 0x00000003 0xFD750000 - 0xFD7A1FFF Memory Allocation 0x00000004 0xFD730000 - 0xFD74FFFF Memory Allocation 0x00000004 0xFD72F000 - 0xFD72FFFF Memory Allocation 0x00000004 0xF6000000 - 0xF601FFFF FV Hob 0xE0000000 - 0xE01FFFFF FV Hob 0xFD7B0000 - 0xFDFB797F FV2 Hob 0xFD7B0000 - 0xFDFB797F 00000000-0000-0000-0000-000000000000 - 9E21FD93-9C72-4C15-8C4B-E77F1DB2D792 FV3 Hob 0xFD7B0000 - 0xFDFB797F - 0x0 - 0x1 00000000-0000-0000-0000-000000000000 - 9E21FD93-9C72-4C15-8C4B-E77F1DB2D792 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/PCD/Dxe/Pcd/DEBUG/PcdDxe.dll 0xFD675000 Loading driver at 0x000FD674000 EntryPoint=0x000FD6754CC PcdDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xF8670000 Loading driver at 0x000F8660000 EntryPoint=0x000F86700B4 RuntimeDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Metronome/Metronome/DEBUG/Metronome.dll 0xFD66F000 Loading driver at 0x000FD66E000 EntryPoint=0x000FD66F0A4 Metronome.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe/DEBUG/ResetSystemRuntimeDxe.dll 0xF85D0000 Loading driver at 0x000F85C0000 EntryPoint=0x000F85D00B8 ResetSystemRuntimeDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xFD663000 Loading driver at 0x000FD662000 EntryPoint=0x000FD6635DC SecurityStubDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xFD656000 Loading driver at 0x000FD655000 EntryPoint=0x000FD6565DC AcpiTableDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xFD631000 Loading driver at 0x000FD630000 EntryPoint=0x000FD6315DC HiiDatabase.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/ConfigurationManager/ConfigurationManagerDxe/ConfigurationManagerDxeSoc/DEBUG/ConfigurationManagerDxe.dll 0xFD629000 Loading driver at 0x000FD628000 EntryPoint=0x000FD62908C ConfigurationManagerDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/DynamicTablesPkg/Drivers/DynamicTableFactoryDxe/DynamicTableFactoryDxe/DEBUG/DynamicTableFactoryDxe.dll 0xFD5EF000 Loading driver at 0x000FD5EE000 EntryPoint=0x000FD5F348C DynamicTableFactoryDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xFD5E8000 Loading driver at 0x000FD5E7000 EntryPoint=0x000FD5E808C SerialDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll 0xFD5E0000 Loading driver at 0x000FD5DF000 EntryPoint=0x000FD5E0338 ArmGicDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/EmbeddedPkg/Drivers/FdtClientDxe/FdtClientDxe/DEBUG/FdtClientDxe.dll 0xFD5D7000 Loading driver at 0x000FD5D6000 EntryPoint=0x000FD5D76B4 FdtClientDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xFD5C3000 Loading driver at 0x000FD5C2000 EntryPoint=0x000FD5C34CC DevicePathDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe/DEBUG/ArmPciCpuIo2Dxe.dll 0xFD5BC000 Loading driver at 0x000FD5BB000 EntryPoint=0x000FD5BC08C ArmPciCpuIo2Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/DpcDxe/DpcDxe/DEBUG/DpcDxe.dll 0xFD5B5000 Loading driver at 0x000FD5B4000 EntryPoint=0x000FD5B508C DpcDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe/DEBUG/HttpUtilitiesDxe.dll 0xFD5AD000 Loading driver at 0x000FD5AC000 EntryPoint=0x000FD5AD4AC HttpUtilitiesDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe/DEBUG/SmbiosDxe.dll 0xFD5A3000 Loading driver at 0x000FD5A2000 EntryPoint=0x000FD5A35DC SmbiosDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xFD595000 Loading driver at 0x000FD594000 EntryPoint=0x000FD59604C ArmCpuDxe.efi ReplaceTableEntry: splitting block entry with MMU disabled add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xFD58A000 Loading driver at 0x000FD589000 EntryPoint=0x000FD58A5DC FaultTolerantWriteDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/LogoDxe/LogoDxe/DEBUG/LogoDxe.dll 0xFD566000 Loading driver at 0x000FD565000 EntryPoint=0x000FD56608C LogoDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/DynamicTablesPkg/Drivers/DynamicTableManagerDxe/DynamicTableManagerDxe/DEBUG/DynamicTableManagerDxe.dll 0xFD55E000 Loading driver at 0x000FD55D000 EntryPoint=0x000FD55E08C DynamicTableManagerDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe/DEBUG/GenericWatchdogDxe.dll 0xFD557000 Loading driver at 0x000FD556000 EntryPoint=0x000FD55709C GenericWatchdogDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xFD550000 Loading driver at 0x000FD54F000 EntryPoint=0x000FD5500CC ArmTimerDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe/DEBUG/SetupBrowser.dll 0xFD52E000 Loading driver at 0x000FD52D000 EntryPoint=0x000FD52E5DC SetupBrowser.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/BdsDxe/BdsDxe/DEBUG/BdsDxe.dll 0xFD50E000 Loading driver at 0x000FD50D000 EntryPoint=0x000FD50E5DC BdsDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicCommand/DEBUG/httpDynamicCommand.dll 0xFD4FA000 Loading driver at 0x000FD4F9000 EntryPoint=0x000FD4FA4CC httpDynamicCommand.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand/DEBUG/tftpDynamicCommand.dll 0xF8550000 Loading driver at 0x000F854F000 EntryPoint=0x000F85504CC tftpDynamicCommand.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/SmbiosPlatformDxe/SmbiosPlatformDxe/DEBUG/SmbiosPlatformDxe.dll 0xFD4F1000 Loading driver at 0x000FD4F0000 EntryPoint=0x000FD4F1500 SmbiosPlatformDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/CadenceQspiDxe/CadenceQspiDxe/DEBUG/CadenceQspiDxe.dll 0xF8500000 Loading driver at 0x000F84F0000 EntryPoint=0x000F85000C4 CadenceQspiDxe.efi Detected n25q256a SPI NOR flash with page size 256 B, erase size 4 KB, total 32 MB add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/DEBUG/RamDiskDxe.dll 0xF8490000 Loading driver at 0x000F848F000 EntryPoint=0x000F84905DC RamDiskDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe/DEBUG/DisplayEngine.dll 0xF8473000 Loading driver at 0x000F8472000 EntryPoint=0x000F84735DC DisplayEngine.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe/DEBUG/PciHostBridgeDxe.dll 0xF8461000 Loading driver at 0x000F8460000 EntryPoint=0x000F84614E4 PciHostBridgeDxe.efi RootBridge: PcieRoot(0x0) Support/Attr: 0 / 0 DmaAbove4G: Yes NoExtConfSpace: No AllocAttr: 3 (CombineMemPMem Mem64Decode) Bus: 0 - FF Translation=0 Io: 0 - 3FFFFF Translation=0 Mem: 60000000 - 6EFFFFFF Translation=0 MemAbove4G: 900000000 - 28BFFFFFFF Translation=0 PMem: FFFFFFFFFFFFFFFF - 0 Translation=0 PMemAbove4G: FFFFFFFFFFFFFFFF - 0 Translation=0 RootBridge: Acpi(PNP0A09,0x0) Support/Attr: 0 / 0 DmaAbove4G: Yes NoExtConfSpace: No AllocAttr: 3 (CombineMemPMem Mem64Decode) Bus: 0 - FF Translation=0 Io: 0 - 3FFFFF Translation=0 Mem: 70000000 - 7EFFFFFF Translation=0 MemAbove4G: 3000000000 - 4FBFFFFFFF Translation=0 PMem: FFFFFFFFFFFFFFFF - 0 Translation=0 PMemAbove4G: FFFFFFFFFFFFFFFF - 0 Translation=0 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xF8410000 Loading driver at 0x000F8400000 EntryPoint=0x000F8410150 VariableRuntimeDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xF8320000 Loading driver at 0x000F8310000 EntryPoint=0x000F832008C RealTimeClock.efi InitializeRealTimeClock: using default timezone/daylight settings add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xF8280000 Loading driver at 0x000F8270000 EntryPoint=0x000F82800A4 CapsuleRuntimeDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0xF81E0000 Loading driver at 0x000F81D0000 EntryPoint=0x000F81E008C MonotonicCounterRuntimeDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/CadenceI2cDxe/CadenceI2cDxe/DEBUG/CadenceI2cDxe.dll 0xF86B5000 Loading driver at 0x000F86B4000 EntryPoint=0x000F86B54C4 CadenceI2cDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/Tda19988Dxe/Tda19988Dxe/DEBUG/Tda19988Dxe.dll 0xF8547000 Loading driver at 0x000F8546000 EntryPoint=0x000F85474CC Tda19988Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xF8178000 Loading driver at 0x000F8177000 EntryPoint=0x000F81783DC ConPlatformDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xF816A000 Loading driver at 0x000F8169000 EntryPoint=0x000F816A4AC ConSplitterDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xF815F000 Loading driver at 0x000F815E000 EntryPoint=0x000F815F4AC GraphicsConsoleDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xF8151000 Loading driver at 0x000F8150000 EntryPoint=0x000F81515DC TerminalDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Drivers/BootMonFs/BootMonFs/DEBUG/BootMonFs.dll 0xF8145000 Loading driver at 0x000F8144000 EntryPoint=0x000F81455DC BootMonFs.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xF8135000 Loading driver at 0x000F8134000 EntryPoint=0x000F81355DC Fat.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xF812B000 Loading driver at 0x000F812A000 EntryPoint=0x000F812B4AC DiskIoDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xF811F000 Loading driver at 0x000F811E000 EntryPoint=0x000F811F5DC PartitionDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xF8541000 Loading driver at 0x000F8540000 EntryPoint=0x000F854108C EnglishDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe/DEBUG/FvSimpleFileSystem.dll 0xF8114000 Loading driver at 0x000F8113000 EntryPoint=0x000F81144CC FvSimpleFileSystem.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll 0xF810A000 Loading driver at 0x000F8109000 EntryPoint=0x000F810A5DC I2cDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe/DEBUG/PciBusDxe.dll 0xF80EF000 Loading driver at 0x000F80EE000 EntryPoint=0x000F80EF5DC PciBusDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru/DEBUG/AtaAtapiPassThruDxe.dll 0xF80DC000 Loading driver at 0x000F80DB000 EntryPoint=0x000F80DC5B4 AtaAtapiPassThruDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe/DEBUG/AtaBusDxe.dll 0xF80D0000 Loading driver at 0x000F80CF000 EntryPoint=0x000F80D04C4 AtaBusDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe/DEBUG/SataController.dll 0xF80C8000 Loading driver at 0x000F80C7000 EntryPoint=0x000F80C84AC SataController.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe/DEBUG/UhciDxe.dll 0xF80BB000 Loading driver at 0x000F80BA000 EntryPoint=0x000F80BB4AC UhciDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe/DEBUG/EhciDxe.dll 0xF80AC000 Loading driver at 0x000F80AB000 EntryPoint=0x000F80AC4AC EhciDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe/DEBUG/XhciDxe.dll 0xF8098000 Loading driver at 0x000F8097000 EntryPoint=0x000F80984AC XhciDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe/DEBUG/UsbBusDxe.dll 0xF8088000 Loading driver at 0x000F8087000 EntryPoint=0x000F808859C UsbBusDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe/DEBUG/UsbKbDxe.dll 0xF807C000 Loading driver at 0x000F807B000 EntryPoint=0x000F807C4AC UsbKbDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.dll 0xF8070000 Loading driver at 0x000F806F000 EntryPoint=0x000F80704AC UsbMassStorageDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe/DEBUG/NvmExpressDxe.dll 0xF8060000 Loading driver at 0x000F805F000 EntryPoint=0x000F80604AC NvmExpressDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/SnpDxe/SnpDxe/DEBUG/SnpDxe.dll 0xF8054000 Loading driver at 0x000F8053000 EntryPoint=0x000F805459C SnpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/VlanConfigDxe/VlanConfigDxe/DEBUG/VlanConfigDxe.dll 0xF8048000 Loading driver at 0x000F8047000 EntryPoint=0x000F80485DC VlanConfigDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/MnpDxe/MnpDxe/DEBUG/MnpDxe.dll 0xF8037000 Loading driver at 0x000F8036000 EntryPoint=0x000F803759C MnpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/ArpDxe/ArpDxe/DEBUG/ArpDxe.dll 0xF802B000 Loading driver at 0x000F802A000 EntryPoint=0x000F802B59C ArpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Dhcp4Dxe/Dhcp4Dxe/DEBUG/Dhcp4Dxe.dll 0xF801B000 Loading driver at 0x000F801A000 EntryPoint=0x000F801B59C Dhcp4Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Ip4Dxe/Ip4Dxe/DEBUG/Ip4Dxe.dll 0xF7FFF000 Loading driver at 0x000F7FFE000 EntryPoint=0x000F7FFF59C Ip4Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Udp4Dxe/Udp4Dxe/DEBUG/Udp4Dxe.dll 0xF7FF0000 Loading driver at 0x000F7FEF000 EntryPoint=0x000F7FF059C Udp4Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Mtftp4Dxe/Mtftp4Dxe/DEBUG/Mtftp4Dxe.dll 0xF7FE1000 Loading driver at 0x000F7FE0000 EntryPoint=0x000F7FE159C Mtftp4Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Dhcp6Dxe/Dhcp6Dxe/DEBUG/Dhcp6Dxe.dll 0xF7FD0000 Loading driver at 0x000F7FCF000 EntryPoint=0x000F7FD05DC Dhcp6Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Ip6Dxe/Ip6Dxe/DEBUG/Ip6Dxe.dll 0xF7FAA000 Loading driver at 0x000F7FA9000 EntryPoint=0x000F7FAA5DC Ip6Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Udp6Dxe/Udp6Dxe/DEBUG/Udp6Dxe.dll 0xF7F9B000 Loading driver at 0x000F7F9A000 EntryPoint=0x000F7F9B59C Udp6Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/Mtftp6Dxe/Mtftp6Dxe/DEBUG/Mtftp6Dxe.dll 0xF7F8B000 Loading driver at 0x000F7F8A000 EntryPoint=0x000F7F8B59C Mtftp6Dxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/TcpDxe/TcpDxe/DEBUG/TcpDxe.dll 0xF7F70000 Loading driver at 0x000F7F6F000 EntryPoint=0x000F7F7059C TcpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe/DEBUG/UefiPxeBcDxe.dll 0xF7F58000 Loading driver at 0x000F7F57000 EntryPoint=0x000F7F585DC UefiPxeBcDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/DnsDxe/DnsDxe/DEBUG/DnsDxe.dll 0xF7F46000 Loading driver at 0x000F7F45000 EntryPoint=0x000F7F4659C DnsDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/HttpDxe/HttpDxe/DEBUG/HttpDxe.dll 0xF7F31000 Loading driver at 0x000F7F30000 EntryPoint=0x000F7F315DC HttpDxe.efi add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/NetworkPkg/HttpBootDxe/HttpBootDxe/DEBUG/HttpBootDxe.dll 0xF7F18000 Loading driver at 0x000F7F17000 EntryPoint=0x000F7F185DC HttpBootDxe.efi ConvertPages: failed to find range 180000000 - 180022FFF Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 Loading driver at 0x000F7EF4000 EntryPoint=0x000F7EF6008 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/Platform/ARM/Morello/Drivers/PlatformDxe/PlatformDxeSoc/DEBUG/PlatformDxe.dll 0xF7EEE000 Loading driver at 0x000F7EED000 EntryPoint=0x000F7EEE2AC PlatformDxe.efi [PlatformDxe:I2cEnableBusConf]: requested bus speed 400000 != configured bus speed 386363 add-symbol-file /builds/morello/manifest/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANGDWARF/AARCH64/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe/DEBUG/LcdGraphicsOutputDxe.dll 0xF7EE4000 Loading driver at 0x000F7EE3000 EntryPoint=0x000F7EE44C4 LcdGraphicsOutputDxe.efi
Thanks,
Mostafa
Hi Mostafa,
After checking on the shared logs I could see the following in the SCP logs:
[ 0.000000] [PCIe] Powering ON controller... [ 0.004050] [PCIe] Timeout! [ 0.006834] [FWK] Process event ([NOT 17:0]: [ELM 17:0] -> [ELM 34:0]) (-7) [ 0.013758] [CCIX] Powering ON controller... [ 0.018023] [CCIX] Timeout! [ 0.020809] [FWK] Process event ([NOT 17:0]: [ELM 17:0] -> [ELM 34:1]) (-7)
Thanks,Himanshu
Sorry, I was a way for while.
1. I am using the power supplier that came with the board
2. No external devices connect to the board
3. I tried on another morello board (although it's in a different looking case) and the firmware works fine