Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.
We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.
Thank you for your understanding.
I'm trying to go through the steps of getting started with Streamline but I got stuck on the gatorme command : instruction says "On the host, run the gatorme script to set up the target device so that Streamline can connect to it. Use the following command-line arguments:.."
gatorme
Following that I am passing the following command: gatorme com.arm.malideveloper.openglessdk.texturecube G72 gatord and I get the following issue:
gatord: 1 file pushed. 11.5 MB/s (2490344 bytes in 0.207s)Streamline gatord version 700 (Streamline v7.0)Using unix domain socket instead of TCP connectionManual step: Capture in Streamline, and then press any key.Press any key to continue . . . Ignoring user provided Mali device type
pkill: TERM->8356: Operation not permitted
I'm not really sure where it comes from. The target device is a samsung s9 with a mali-G72 gpu and usb debugging is enabled and the adb sees the device.
The setup seems to be working here. At the point the script says "Manual step: Capture in Streamline, and then press any key." you need to switch to the Streamline GUI and connect to the target at the address "Localhost:4242".
Only "Press a key to continue ..." in the script console once you have finished capturing data in Streamline; that tells the script to clean up (stop gator and remove it from the device). The error from pkill is benign (the script tries to kill gatord two different ways - it will print that error if one of them fails, even if the other succeeded).
Kind regards, Pete