We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I'm trying to go through the steps of getting started with Streamline but I got stuck on the gatorme command : instruction says "On the host, run the gatorme script to set up the target device so that Streamline can connect to it. Use the following command-line arguments:.."
gatorme
Following that I am passing the following command: gatorme com.arm.malideveloper.openglessdk.texturecube G72 gatord and I get the following issue:
gatord: 1 file pushed. 11.5 MB/s (2490344 bytes in 0.207s)Streamline gatord version 700 (Streamline v7.0)Using unix domain socket instead of TCP connectionManual step: Capture in Streamline, and then press any key.Press any key to continue . . . Ignoring user provided Mali device type
pkill: TERM->8356: Operation not permitted
I'm not really sure where it comes from. The target device is a samsung s9 with a mali-G72 gpu and usb debugging is enabled and the adb sees the device.