• State Accepted Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 1487 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC1768 and CMSIS I2C Support

Paul Bonnie

Dears,

In Keil MDK uVision environment, I'm programming an I2C Interface between LPC1768 controller and a 4 digit I2C 7 Segment display.

I'm using CMSIS Driver and device libraries for LPC1768 and I2C support. See screenshot below:

After building the project, I get the error: C:/Users/pbonn/AppData/Local/Arm/Packs/Keil/LPC1700_DFP/2.7.0/RTE_Driver/I2C_LPC17xx.c(82): error: "I2C not configured in RTE_Device.h!"

I have no idea whit is still missing in the setup of my project. What can/should I do to prevent this error?

Looking forward to you suggestions.

0