I have issue with simulator when debugging. Here is my error
*** error 65: access violation at 0xFFFFFFF4 : no 'write' permission
I follow this old guide https://community.arm.com/support-forums/f/keil-forum/28981/access-violation-at-0xfffffff4, but it did not work.
My target board is MIMXRT100-EVKB, so I installed DFP as follow https://www.keil.arm.com/devices/nxp-mimxrt1062dvl6b/boards/. I import hello_world example from packs installer, build, debug and run.
Thanks.
Please always confirm the product and version in use.
The Community-Link provided obviously is not working anymore.
Refer to:
"UVISION DEBUGGER: Error 65: Access Violation"
developer.arm.com/.../
Thanks. I read this guide.
With my error "*** error 65: access violation at 0xFFFFFFF4 : no 'write' permission". I created .ini file with the content "MAP 0xFFFFFFE0, 0xFFFFFFFF Read Write // map peripherals". This memory range cover memory address in the above error. After creating this .ini file, I built, debug and click to Run button, but the simulation runs lone time. I think that the problem is happen with simulation although the access violation error was not happen.
I can not attach my screen.
I am using Keil uvision 5 (MDK-arm version 5.39 https://www.keil.com/demo/eval/arm.htm)
My target board is NXP MIMXRT100-EVKB. Because now I do not have the board, so I want to use simulator mode in the Keil uvison.
Sorry my misunderstanding. What do you mean about "exact name of the target"?
Sorry for the misunderstanding, I am aware of the processor (MIMXRT1062DVL6B), but I can't locate any details about an MIMXRT100-EVKB.
It is not MIMXRT100-EVKB. It is MIMXRT1060-EVKB.
Here is BSP Arm Keil | NXP MIMXRT1060-EVKB_BSP
Here are DFP Arm Keil | NXP MIMXRT1061_DFP Arm Keil | NXP MIMXRT1062_DFP
I installed 3 above items, then I import hello world example. I also include .ini file with tre content "map 0xFFFFFFE0,0xFFFFFFFF read write" adn run with simulator mode.
Please check it for me. Thank you so much.