Today I have returned to using Keil Studio Cloud after not logging in for about a year and have found that some key parts of the functionality do not seem to be working. I have not changed any aspects of my program or the hardware set-up since last using the IDE.
The first issue is regarding downloading the firmware after it has been built/compiled. It simply does not seem to download like it used to when I last used Keil Studio
Has this functionality changed? How do I get the complied program?
The second issue is that my device will not connect. I am using an ST-LINK V2 with a custom board that functions as a NUCLEO-L073 target.
I have tried updating the STLINK to the latest firmware and have also verified that it is working fine when connecting to & programming the same board in STM32CubeProgrammer.
I have reviewed the documentation pages for troubleshooting "Connected development board or debug probe not found" (https://developer.arm.com/documentation/102497/1-6/Known-issues-and-troubleshooting/Troubleshooting/Connected-development-board-or-debug-probe-not-found) but the Windows Device Manager does not show any issues.
I have also reviewed the documentation page for troubleshooting "Connection fails when clicking Run project or Debug project", although it is not strictly relevant as it is intended for when "Keil Studio Cloud has correctly detected your development board or debug probe and the device shows as active, but the connection fails when you click Run project or Debug project. There can be multiple reasons for a connection failure." (https://developer.arm.com/documentation/102497/1-6/Known-issues-and-troubleshooting/Troubleshooting/Connection-fails-when-clicking-Run-project-or-Debug-project)
Any news on fixing this in Keil Studio Cloud?
as far as I can see, KSC development is still working on this. Have you tried MDK 6 in the meantime? Does this also work for you?