I want to program a stm32h7a3zi-q microcontroller with keil v5 but i am facing an issue of no target found can anyone help me with this
Sorry for the inconvenience,
i tried with both keil v5 and stm ide while attaching i made mistake .
These are some picture for reference.
The second photo clearly shows you that uVision cannot see the ST-Link at all.
So:
Rakshitha said:i tried with both keil v5 and stm ide
That, surely, tells you that the problem is with the ST-Link and/or the target - nothing to do with the IDE ?
Rakshitha said:that's detecting the board's ST link debugger
What do you mean by that?
Sorry, I see - the Keil screenshot is, indeed, showing that it sees the ST-Link but not the Target.
But, again, if you get the same with CubeIDE then it can't be anything to do with the IDE - there must be a problem in your Target and/or in your connections from the Target to the ST-Link.
Are you sure that the Target hasn't disabled the debug pins, or had readout protection applied, etc ?
As these are ST-Specific things, you'd be better pursuing these on the ST forum:
https://community.st.com/s/topic/0TO0X000000BSqSWAW/stm32-mcus
(if you do cross, be sure to give links in all threads).
Sure thanks for the support