We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I want to program a stm32h7a3zi-q microcontroller with keil v5 but i am facing an issue of no target found can anyone help me with this
Sorry for the inconvenience,
i tried with both keil v5 and stm ide while attaching i made mistake .
These are some picture for reference.
The second photo clearly shows you that uVision cannot see the ST-Link at all.
So:
Rakshitha said:i tried with both keil v5 and stm ide
That, surely, tells you that the problem is with the ST-Link and/or the target - nothing to do with the IDE ?
Rakshitha said:that's detecting the board's ST link debugger
What do you mean by that?
Sorry, I see - the Keil screenshot is, indeed, showing that it sees the ST-Link but not the Target.
But, again, if you get the same with CubeIDE then it can't be anything to do with the IDE - there must be a problem in your Target and/or in your connections from the Target to the ST-Link.
Are you sure that the Target hasn't disabled the debug pins, or had readout protection applied, etc ?
As these are ST-Specific things, you'd be better pursuing these on the ST forum:
https://community.st.com/s/topic/0TO0X000000BSqSWAW/stm32-mcus
(if you do cross, be sure to give links in all threads).
Sure thanks for the support