This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Device not Found in Keil

Hey All,

Greetings for the days...!!!

I have installed Keil MDk for working on STM platform but when i try to find device like STM32F103, The keil can't show me the device, after googling i installed pack using Pack installer but still i am not getting any device then i reinstall keil and after that i cant see any device like 8051, or else which i can see before reinstalling.

so what should i have to do?

Top replies

ChenTang over 3 years ago +2 verified

Have you activated your MDK using the free-of-charge STM32F0/L0/G0 license? if yes, it is normal you don't see other devices other than S TM32F0/L0/G0 devices

Parents

0 rkopsch over 3 years ago in reply to Jignesh Doshi

a: The STM32F103 is a Cortex-M3 - to get this target supported order a free of charge (30 days limited) MDKpro license key at your local distributor: http://www.keil.com/distis/

b: Note, 8051 targets require PK51: https://www.keil.com/c51/pk51kit.asp
Cancel
Up 0 Down

Cancel

Reply

0 rkopsch over 3 years ago in reply to Jignesh Doshi

a: The STM32F103 is a Cortex-M3 - to get this target supported order a free of charge (30 days limited) MDKpro license key at your local distributor: http://www.keil.com/distis/

b: Note, 8051 targets require PK51: https://www.keil.com/c51/pk51kit.asp
Cancel
Up 0 Down

Cancel

Children

No data