Hey All,
Greetings for the days...!!!
I have installed Keil MDk for working on STM platform but when i try to find device like STM32F103, The keil can't show me the device, after googling i installed pack using Pack installer but still i am not getting any device then i reinstall keil and after that i cant see any device like 8051, or else which i can see before reinstalling.
so what should i have to do?
Have you activated your MDK using the free-of-charge STM32F0/L0/G0 license? if yes, it is normal you don't see other devices other than STM32F0/L0/G0 devices
Now what i have to do?
a: The STM32F103 is a Cortex-M3 - to get this target supported order a free of charge (30 days limited) MDKpro license key at your local distributor: http://www.keil.com/distis/
b: Note, 8051 targets require PK51: https://www.keil.com/c51/pk51kit.asp
Jignesh Doshi said:Now what i have to do?
Properly review the available product options, and choose one which actually supports the Target(s) you need to develop for?
https://www2.keil.com/mdk5 - note the link to compare MDK editions:
https://www2.keil.com/mdk5/selector
rkopsch said:a free of charge (30 days limited) MDKpro license key
Or the Lite edition - which is not time-limited, bus has other restrictions:
https://www2.keil.com/limits