We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I'm newbie in Keil and mVision. I would like to know if it is possible to simulate a KL25Z in mVision because I need to run some tests but I forgot my board at office.
Thanks.
DanielRuiz said:it stops (hangs) in the line "/* Wait for CLKST clock status bits to show clock source is ext ref clk */"
So it's waiting for an external clock.
Clearly, that is never going to happen in the simulator!
DanielRuiz said:Wait for CLKST clock status bits to show clock source is ext ref clk
So don't do that, then!
But note that you are going to get similar problems on all external hardware interactions!
That's why it is generally much easier to use an actual board.
Surely, online suppliers are still available ?
eg,
https://uk.farnell.com/nxp/frdm-kl25z/arm-kinetis-kl25z-freedom-dev/dp/2191861
it's only twelve quid!
https://www.mouser.co.uk/ProductDetail/NXP-Semiconductors/FRDM-KL25Z?qs=wI1qWm3nqpC0oYrjHig4og==
https://www.digikey.com/product-detail/en/nxp-usa-inc/FRDM-KL25Z/FRDM-KL25Z-ND/3529594
etc, etc, ...