• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 25 subscribers
  • Views 8369 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bootloader RTX jump RTX app

Illaumegui

Hello !

I am working on bootloader application using RTX on mdk 5.

The bootloader load the user application using Ethernet communication and proceed to the jump after a reset.

When i use an simple blinky example and modify the BCA, the jump WORKS WELL !

BUT If I use an RTX application, the jump don't works.

I used the bootloader's vendor (without RTX) the jump to my RTX application works..

I suspect that RTX application erased some thing at initialization

Some one already seen that before

Board used : FRDM K64F

IDE : mdk 5

Parents
  • 0 in reply to Illaumegui

    Hello !

    I try __set_CONTROL(0x00000000);  but this is the same issue

    In attachment, the screen shot of the debug bootloader after jump.

    also, i show:

    • The main function of the user application who works with the kinetis bootloader.
    • The main function of the blinky LED who works with my rtx bootloader

    I am lost..

Reply
  • 0 in reply to Illaumegui

    Hello !

    I try __set_CONTROL(0x00000000);  but this is the same issue

    In attachment, the screen shot of the debug bootloader after jump.

    also, i show:

    • The main function of the user application who works with the kinetis bootloader.
    • The main function of the blinky LED who works with my rtx bootloader

    I am lost..

Children