We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I have seen some confusing information posted regarding "ADuC debug" using the Accutron "Spear" and "Uspear" products.
Quick history to clarify:
======= 1. ACE ======= # the first single pin debugger from accutron. # connection to PC via the serial port. # Accutron Debugger: ACE # no longer sold. = = = = ======== 2. Spear ======== # The ACE was replaced by the "spear". # Added Support for single cycle devices ADuC84x family. # Low Cost. # connected again to the PC via serial port. # No longer sold due to European Lead free regulations. # uVision Driver: www.accutron.com/.../Keil-spear.zip
# Accutron Debugger: Aspire V1.x.x download www.accutron.com/.../Aspire_V1_0_7.zip = = = = ========= 3. USpear ========= # "Spear" was replaced by the current debugger "USpear", see " href= "www.accutron.com/.../USPEAR_Keil.zip">www.accutron.com/.../USPEAR_Keil.zip
# Accutron Debugger: Aspire V2.x.x download www.accutron.com/.../Aspire_V2_0_3.zip = = = =
the information posted on http://www.keil.com/forum/docs/thread10090.asp
IS NOT CORRECT
Please note: this has been confirmed to me by the 3rd party vendor.
Perhaps you could explain in what way(s) it is incorrect?