• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 793 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to setup the own application using the iap driver from ST-Microelectronics

Manfred Geugelin

Hello,

Has anyone experience using the IAP-driver from ST-Microelectronics. the driver is working correctly but I can't run my own application at address 0x40002000.
Has anyone an exampleproject how to setup the own application. ( I use interrupts and have some parts of program located in ram).

needing help urgently

thanks

Manfred

Parents
  • 0

    Hello,
    I meet face a difficulty same you.
    My test program without Interrupt was running on IAP.
    However, My application is using Timer Interrupt, So, my application was pause at Timer Interrupt.

    I think that Interrupt Vector is remapped at RAM Aera. But I don't know method.
    Though, My application was modified by ADS(Arm Developer Suite), then it is running on IAP.

    I want to work by Keil Environment. So I want method to work it.

    Please Help me!!!

Reply
  • 0

    Hello,
    I meet face a difficulty same you.
    My test program without Interrupt was running on IAP.
    However, My application is using Timer Interrupt, So, my application was pause at Timer Interrupt.

    I think that Interrupt Vector is remapped at RAM Aera. But I don't know method.
    Though, My application was modified by ADS(Arm Developer Suite), then it is running on IAP.

    I want to work by Keil Environment. So I want method to work it.

    Please Help me!!!

Children
No data