Hello, I'm using a C167 Bord with uVision2. My program sets the configurations for the serial port,sends some data via the port and it works in the Serial Window #1 (I see the data which I had sent). In the next step I wanted to display some values in the HYPER TERMINAL but nothing happens in the Terminal and I don't know why. thx for your help.
Check the tx-pin of your C167 with an oscilloscope. If it is toggeling then check the tx line after the RS232 transceiver (for example MAX232). I wanted to know if you have already succesful loaded an other program (wich only toggels one pin) to the FlashROM. I'm a bit confused about "my program runs with an other application".