• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 1072 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ULINK File System Copy File?

@Marc Crandall

Hello,

I'm not sure if this is easily doable but I have an embedded device that has a 4MB NOR flash connected to an LPC1788.

Part of the NOR is used for code, part used for direct NOR log data (i.e. no file system) and another part has a file system.

I'm looking for a way to copy a file onto the file system using a ULINK Pro.

Here's what I was thinking, make a dummy algorithm for a dummy range that just copies my files to the file system.

Has anyone ever do this, or something similar?

Thanks for tips, advice, pointers...

MAC

Parents
  • 0 in reply to Tamiryan Michael

    I don't understand what you mean by part of initialization? I'm trying to copy files from my PC to my embedded file system when I program the board.
    This is something which would be really useful to me (prob only during development but nonetheless...)

    What I do now is after I flash the code I copy the files to a USB key, move the key to my board and initiate a copy command to copy from the MSD to the embedded file system.

    I want to make this easier/faster.

    Thanks

    M

Reply
  • 0 in reply to Tamiryan Michael

    I don't understand what you mean by part of initialization? I'm trying to copy files from my PC to my embedded file system when I program the board.
    This is something which would be really useful to me (prob only during development but nonetheless...)

    What I do now is after I flash the code I copy the files to a USB key, move the key to my board and initiate a copy command to copy from the MSD to the embedded file system.

    I want to make this easier/faster.

    Thanks

    M

Children
No data