• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 1648 views
  • Users 0 members are here
Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Address Space Overflow - But none used

Per Franck

I'm building a small program and i'm getting
ERROR L107: ADDRESS SPACE OVERFLOW.
SPACE: DATA
SEGMENT: _DATA_GROUP_
LENGTH: 62H

I tried following this article (http://www.keil.com/support/docs/1241.htm), but I cannot find any data used! When built, it says i'm using 125.1 bytes of data... I have no clue who's using this data, in the m51 file i get

 * * * * * * *   D A T A   M E M O R Y   * * * * * * *
REG     0000H     0008H     ABSOLUTE     "REG BANK 0"
DATA    0008H     000EH     UNIT         ?DT?STORAGE
DATA    0016H     0003H     UNIT         ?DT?LXECU
        0019H     0007H                  *** GAP ***
BIT     0020H.0   0001H.1   UNIT         _BIT_GROUP_
        0021H.1   0000H.7                *** GAP ***
IDATA   0022H     0001H     UNIT         ?STACK


So, in the module STORAGE i'm using 14 bytes, and in the module LXECU i'm using 3 bytes. That's Fine... but where is this 98 byte block coming from that overflows? all my variables are xdata....

0