• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 1681 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Address Space Overflow - But none used

Per Franck

I'm building a small program and i'm getting
ERROR L107: ADDRESS SPACE OVERFLOW.
SPACE: DATA
SEGMENT: _DATA_GROUP_
LENGTH: 62H

I tried following this article (http://www.keil.com/support/docs/1241.htm), but I cannot find any data used! When built, it says i'm using 125.1 bytes of data... I have no clue who's using this data, in the m51 file i get

 * * * * * * *   D A T A   M E M O R Y   * * * * * * *
REG     0000H     0008H     ABSOLUTE     "REG BANK 0"
DATA    0008H     000EH     UNIT         ?DT?STORAGE
DATA    0016H     0003H     UNIT         ?DT?LXECU
        0019H     0007H                  *** GAP ***
BIT     0020H.0   0001H.1   UNIT         _BIT_GROUP_
        0021H.1   0000H.7                *** GAP ***
IDATA   0022H     0001H     UNIT         ?STACK


So, in the module STORAGE i'm using 14 bytes, and in the module LXECU i'm using 3 bytes. That's Fine... but where is this 98 byte block coming from that overflows? all my variables are xdata....

0