• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 21 subscribers
  • Views 1099 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

update MCB2300 evaluation board with flash Magic

Stephen Isidore

Hello word

I'm trying to download my software onto MCB2300 board with the last release (3.65) of flash magic tools and but i have no synchronization with the board (first spep? synchronized). I check configuration board with the last documentation.
if I'm trying to initiate the communication with terminal, i've obtained same result : no synchronization !

All it's working if I change MBC2300 board by an another based on LPC2292 chip

Somebody could help me

Thanks for all:

Parents
  • 0

    I already used Flash Magic(3.58.226) with the MCB2300 board(Vers.3) and it worked great.

    Maybe you set the some wrong configuration options?
    So here are the ones I used successfully:
    Baudrate: 57600
    Device: LPC2378
    Interface: None(ISP)
    Oscillator Freq: 12.000000

    Be sure to use the correct COM 0 port on the board.

    That's all I can say...

Reply
  • 0

    I already used Flash Magic(3.58.226) with the MCB2300 board(Vers.3) and it worked great.

    Maybe you set the some wrong configuration options?
    So here are the ones I used successfully:
    Baudrate: 57600
    Device: LPC2378
    Interface: None(ISP)
    Oscillator Freq: 12.000000

    Be sure to use the correct COM 0 port on the board.

    That's all I can say...

Children
No data