• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1199 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem to Flash a Hex-File into the KitCon-163 with Phytec 16W Flashtool

Daniel Homes

Hello

I compile and link my sources without any Problems (Error) then I start my KitCON-163, activated the
Bootstrap-loader and Connected to the device.

After this I try to load the Hex-File for downloading but I can't read the file -> Error message " A Error occured while opening the file ! "

What can I do????????

Daniel

Parents
  • 0 in reply to Daniel Homes

    I use µvision2 and generate the h86 file after this I try to open this file with the 16W Flashtool from Phytec -> Only with this Flashtool I got access to the Kitcon board, FlashTool3 and the old FlashT didn't work.

    I don't know the 16W flashtool (do you have a link?). And our product uses a custom made tool for the bootstrap download. So I'm affraid I can't help you.

    I suggest contacting Phytec or look to a support forum there. Did you manage to get anything working using the Flashtool? Example projects or something?

    The error message suggest a simple file-not-found or perhaps an incorrect format? The latter can be checked by building an example project.

    Good luck,
    Joost Leeuwesteijn

Reply
  • 0 in reply to Daniel Homes

    I use µvision2 and generate the h86 file after this I try to open this file with the 16W Flashtool from Phytec -> Only with this Flashtool I got access to the Kitcon board, FlashTool3 and the old FlashT didn't work.

    I don't know the 16W flashtool (do you have a link?). And our product uses a custom made tool for the bootstrap download. So I'm affraid I can't help you.

    I suggest contacting Phytec or look to a support forum there. Did you manage to get anything working using the Flashtool? Example projects or something?

    The error message suggest a simple file-not-found or perhaps an incorrect format? The latter can be checked by building an example project.

    Good luck,
    Joost Leeuwesteijn

Children